Product Application Performance of Industrial Dust Collector and Pulse Filter Dust Collector
Industrial dust collector
and pulse filter dust collector work normally. When the fan is started, the dust-containing air enters the submerged dust collector from the top or front entrance and is filtered by the filter cartridge. The dust is captured outside the filter cartridge. On the surface, clean air enters the clean air chamber through the center of the filter cartridge and is discharged through the outlet.
When the filter cartridge is cleaned, the timing controller will automatically clean the filter cartridge. At this time, the timing controller will operate the solenoid valve to open the air diaphragm valve, and the high-pressure air will directly flush into the center of the filter cartridge through the air reservoir to blow off the dust trapped on the surface of the filter cartridge. It drops into the dust collecting bucket under the action, and then falls into the designated collection container through the ash discharge mechanism.
Product features: The fan can be selected according to the owner's required air volume. The self-developed single-chip microcomputer controls the operation of the host. The installation is convenient, the dust is automatically pulsed backwash, and the operation is simple and easy to understand. The host is equipped with a remote control interface. The main unit runs smoothly, with built-in muffler, low noise and flat appearance. Industries used: chemical industry, food industry, pharmaceutical industry, electronics industry, machinery manufacturing industry, rubber industry, etc.
The problem of dust accumulation at the bottom of the filter bag caused by the frame of the dust collector needs to be dealt with in a timely manner to ensure that it can fully play a role in the industry, avoid damage to the frame of the dust collector, and ensure that good performance and value continue to be generated in the dust removal. The dust collector frame can remove gases of different forms and performances without causing significant harm and performance to the dust collector frame. The value and role in use cannot be guaranteed, and the important performance and value can be fully exerted.