Maintenance method for reducing suction of industrial dust collector
Several maintenance methods for reducing the suction of industrial dust collectors:
I. Poor airtightness inside the dust removal equipment, such as the tight seal of the motor, the top cover of the case, and the housing. In this case, check the air leakage, such as the housing.
2. The suction hose or nozzle of the vacuum cleaner is blocked by dust and debris, and the airflow is not smooth, which causes the suction power to drop. The equipment should be disassembled, the blocked area should be cleaned, and the suction mouth or the interface of the dust bucket should be cleaned regularly Thing.
3. Because the filter cartridge is blocked for a long time without cleaning, adjust the cleaning cycle of the equipment, shorten the cleaning cycle time, and remove the blockage on the filter material.
Fourth, after long-term use, the fan blade will loosen or slip, which will cause the vacuuming effect to become worse and the suction force to become smaller. Can be determined by fixing the fan blades
Dust collector manufacturer introduction The maintenance method of the industrial dust collector has a smaller suction power. After the industrial dust collector is put into use for a period of time, the operating suction power will become smaller. If the suction power is small, the dust and debris generally sucked in will easily accumulate in the Suction tubes, elbows, and other places can cause internal blockages, which can lead to a vicious cycle of equipment suction.