|Industrial dust treatment equipment series|
|Welding fume exhaust gas treatment series|
|Grinding polishing dust removal equipment|
|Stand-alone dust collector|
|Spiral duct and accessories series|
造方案 : The transformation of dust removal equipment is based on the equipment that can be continued to be used. The dust removal equipment is generally divided into 3 types of transformation schemes :
对除尘设备的本体进行改造， 1: Modify the body of the dust removal equipment,
对除尘设备的管道进行改造。 2: Reconstruction of the pipeline of the dust removal equipment.
对除尘设备的风机进行改造 3: Retrofit the fan of the dust removal equipment
粉尘约有 80 ％～ 90 ％被电场 过滤下来，粉尘从直线流到电场下部，从下面活动，进入除尘设备。 The dust enters from the air inlet of the dust removal equipment, passes through several layers of air distribution plates, and the gas enters the electric field through the electric field of the polishing and dust removal equipment. About 80 % to 90 % of the dust is filtered by the electric field , and the dust flows from the straight line to the lower part of the electric field. From below, enter the dust removal equipment.
The gas with dust reaches the outside of the bag, and the dust is blocked outside the bag. The clean gas flows out of the machine bag, flows into the upper box, and swims into the air valve of the upper box, then enters the exhaust pipe, muffler, and finally from The exhaust pipe is exhausted.
There are pressure gauges and thermometers at the inlet and outlet of the dust removal equipment. The resistance of the dust removal equipment changes during operation. The air pipe design of the dust removal equipment is very important. The correct design is related to the structure and pressure of the dust removal equipment and directly affects the operation of the dust removal equipment. Power consumption.
Dust removal equipment reconstruction design can refer to the case of dust removal equipment manufacturer for analysis.
After the fan of the dust removal equipment is modified, the pressure of the fan needs to be increased because the resistance of the general dust removal equipment is relatively high. In addition, the effect of dust removal equipment is increased, and the air volume of the fan needs to be increased.
There are two ways to transform the dust removal equipment fan:
： 更换新的风机或者加长风叶； 1 : Replace with a new fan or extend the blade;
： 提高风格转速，以满足新的风机的风压和风量需求。 2 : Increase the style speed to meet the wind pressure and air volume requirements of the new fan.
！ A good dust removal equipment transformation plan not only reduces the investment cost but also reduces the area. The most important thing is to greatly improve the filtering effect of the dust removal equipment. For more questions about the dust removal equipment modification plan, please consult us: 400-622- 6298 !