|Industrial dust treatment equipment series|
|Welding fume exhaust gas treatment series|
|Grinding polishing dust removal equipment|
|Stand-alone dust collector|
|Spiral duct and accessories series|
包括一个控制系统，喷射系统，过滤系统，清洗系统包括四个主要系统， 如何正确的使用脉冲布袋除尘器？ Pulse bag filter includes a control system, spray system, filter system and cleaning system. There are four main systems. How to use the pulse bag filter correctly? 如何正确的使用脉冲布袋除尘器相关介绍。 The following is the introduction on how to use the pulse bag filter correctly by Yuchen.
Operation principle of pulse bag filter : Dust-containing gas enters the filter system. The system has a bag support plate suspended through a perforated, bag cage. It is designed to have the upper tube and tightly fit the bag mouth. Fit a flower bag with a perforated plate to prevent dust-containing gas from entering the clean air chamber from the gap between the bag and the bag hole. Clean the main air blower by suction.
The control system or main control device stops the control cabinet and control system of the ash discharge of the injection system. And control the blow from the width of the spray, control the operation of the solenoid valve. The control of its cinder system is mainly how long the cinder stops working.
The injection system refers to the cleaning of the filter system of the solenoid valve is stopped under the control of the control system.
： How to correctly use the pulse bag filter :
1. The left handle pulse controller controls the opening degree of the hair of the solenoid valve, L is small and large is right-handed. The pulse cleaning time control knobs are right, left short, and long glucose, and are usually adjusted to about one minute (see table transmission time). These two knobs 450 are located in the normal position from right hand to left.
2. Production of dust and dust that started after the start of machinery and equipment.
3. The operation of the filter is to discharge the temporary parking unloader to the gray category 5 to 10 minutes before the start. Close to the belt is an ash exhaust nozzle connected to some soft cloth tubes, so that the dust slowly flows on the belt to prevent secondary dust.
4. Turn the manual valve clockwise and counter-clockwise.
脉冲控制器工作。 5, open the bag dust removal equipment pulse controller works.
6. Before starting the centrifugal fan discharge device, check the oil level, the oil level fan bearing box, and check the dust before the foot fastening bolts are loose. Check whether the line is damped at the set position of the switch. Check that the position of the pulse control knob is correct.
的一些 如何正确的使用脉冲布袋除尘器？ The above are some of Yuchen's dust removal equipment manufacturers how to correctly use the pulse bag dust collector? 400-622-6298 ，宇晨环保提供上门看现场、报价、出设计方案等相关服务，欢迎来电！ Relevant basic introductions, if you have any needs in this regard, please call 400-622-6298 . Yuchen Environmental Protection provides on-site viewing, quotation, design and other related services.