|Industrial dust treatment equipment series|
|Welding fume exhaust gas treatment series|
|Grinding polishing dust removal equipment|
|Stand-alone dust collector|
|Spiral duct and accessories series|
| Industrial dust collector maintenance 1: When cleaning the industrial dust collector , please wipe it with a wet cloth containing water or neutral detergent. The main unit head is strictly forbidden to be immersed in water. Do not use corrosive cleaners such as gasoline and banana water, otherwise it will cause shell turtles. crack. |
2: Do not fold the hose frequently, do not stretch and bend excessively.
3: Clean up the sundries and dust removal accessories in a timely manner. The dust grid dust bag is cleaned after each work, check for perforations or air leaks, and thoroughly clean the dust grid and dust bag with detergent and warm water, and blow dry. It is strictly prohibited. Use a non-drying dust bag.
4: Check whether the power cord and plug are damaged. After use, wind the power coil into a bundle and hang it on the hook of the top cover of the machine head.
5: If the main unit is hot, emits a scorching smell, or has abnormal vibration and noise, it should be sent for repair in time, and it should not be used barely.
6: After the water removal work is completed, check the air inlet for blockage or debris, otherwise clean it up. Check for floating waves for damage.
7: When using the industrial dust collector, please handle it gently, and do not bump it with external force.
8: When the industrial dust collector is disabled, it should be placed in a dry and ventilated place.
9: Do not leave the industrial dust collector in a continuous working state for a long time, please control the continuous working time within 2 hours, otherwise it will affect the life of the machine.
10: When the industrial dust collector is used for a long time, the removal force will be reduced due to the clogging of the filter mesh. In order to prevent the drop of force, the filter and cloth bag should be washed regularly with water. After washing, it should be dried in a cool place and then used to restore the force.
Related Searches: Industrial Dust Collector , Landing: http://tvpagency.com