How to solve the problem of reduced dust removal efficiency of the dust collector:
The dust removal effect during the operation of the dust collector is poor and it fails to meet the standard requirements. The main reasons for this problem are: the cylinder of the dust collector is not round, the inner wall is not smooth, the direction of the short air inlet and outlet tubes is incorrect, and the water sprayed from the nozzle of the water film dust collector The membrane is incomplete, the dust-containing air flow is short-circuited, the spiral deflector is not correct, the dust collection box and the inspection door are not closed, etc.
The main preventive measures are: the roundness deviation of simplified Chinese should be less than 1/5000, and the inner wall is smooth and flat. The short air pipes are straight and concentric, and the direction is correct. The nozzles of the water film precipitator shall be arranged at equal distances and in the same direction, and the spiral deflectors shall be perpendicular to the simplified Chinese with uniform pitch. The dust box and inspection door are closed.