Record of the whole process of polishing and dust removal
Grinding, polishing, dust removal, mold polishing generally use rough whetstone to roughen the surface of the cavity of the machined mold, and then remove the marks of the machine tool. The sandpaper surface is polished by a fine sandpaper, and finally the polishing cavity or the surface of the cavity of the mold is finally polished with a polishing paste or a polishing paste, and finally a mirror-like effect is achieved. This is the general process of polishing the mold.
Check whether the shape of the product conforms to the shape of the production process sheet, and only enter the grinding and polishing process after passing the test;
Grind and polish the glue according to the condition of the material before the glue treatment, and then polish and polish after the glue is processed;
First rough the line with a single piece of drawing, and leave 0.5MM of fine grinding and water grinding during rough grinding;
Stitching: Splicing the lines to be polished and polished according to the installation drawing, and selecting and matching according to the color of the surface of the lines to ensure good colors and patterns. Line water mill 500 # shall be uniformly numbered according to the requirements of the installation drawing, and then disassembled and polished. This will not cause the polished and polished lines to be concave and convex at the interface;
When there is a misalignment at the interface, the grinding of the transition section should lengthen the distance, the longer the better, and check the straightness with a ruler when grinding;
The polished and polished lines can be shipped only after passing the quality inspection.