Woodworking polishing and dust collector is
suitable for all kinds of woodworking machinery and equipment such as four-side planer, sander, sawing machine, chipper, rod mill, etc. It can be used by single machine or system. Single machine dust removal is mainly used for dust removal of a single woodworking machine, which is flexible and convenient. System dust removal is used for the dust removal of woodworking machinery production lines. It has the characteristics of economy, practicality and beauty. It does not affect the production operation and can achieve the ideal dust removal effect.
Woodworking polishing dust collector has the following characteristics:
1. Stepped energy saving, perfect control of noise is different from the design of the traditional large fan exposed. Small fans are placed in the upper part of the dust collector box. The fans are perfectly protected inside the casing. The unique stepped energy saving method is implemented in the PLC. Under the control, it cooperates with the use of piping system valves to achieve real energy saving.
2. Flameproof and explosion-proof, multiple safety guarantees Due to the flammable and explosive characteristics of woodworking dust, woodworking dust collectors adopt effective facilities such as anti-static devices, detonation devices, pulse anti-blocking devices, and are equipped with fire sprinkler systems for the safest emergency use To ensure the long-term safe operation of the equipment; the pipeline is equipped with a start-up ash cleaning valve to prevent pipeline blockage and ensure smooth pipeline.
3. Efficient dust removal, more thorough dust collection. The dust removal efficiency of the dust collector is as high as 99.999%, and the dust concentration at the discharge port is lower than 100mg / m3, which is higher than the national emission standard.
4. Flexible configuration to meet user needs The principle of combining inertial separation and filtering and dust removal can be used to handle high concentration mixed air flow, which can effectively separate fine particles below 5um. It is an ideal substitute for traditional cyclone separators.