|Industrial dust treatment equipment series|
|Welding fume exhaust gas treatment series|
|Grinding polishing dust removal equipment|
|Stand-alone dust collector|
|Spiral duct and accessories series|
工业除尘系列中应用比较广泛,现在由宇晨科技的小编与大家一起来了解风管与风管的连接方式 : The air duct is widely used in daily ventilation and industrial dust removal series . Now, the editor of Yuchen Technology will work with you to understand the connection between the air duct and the air duct :
用抱箍连接每一段管的两端轧制成鼓筋,并使及一端缩为小口.装置时按气流方向把小口插入大口,外面用钢制拖箍将两个管端的鼓筋抱紧连接最后用螺栓穿在耳环中固定拧紧。 1. Hoop-type connection of spiral duct : Use the hoop to connect the two ends of each section of the tube to form a bulge , and reduce one end to a small opening . When installing the device, insert the small opening into the large opening according to the airflow direction , and use a steel tow on the outside The hoop hugs the bulges at the ends of the two tubes and then tightens them with bolts in the earrings.
插接式连接主要用于矩形或圆形风管连接,先制作连接管然后插入两侧风管再用自攻螺钉或拉柳钉将及紧密固定即可。 2. Air pipe plug-in connection : Plug-in connection is mainly used for rectangular or round air pipe connection . First make the connection pipe, then insert the air pipe on both sides, and then use self-tapping screws or pull rivets to fix and tightly.
插条式连接于矩形风管连接将不同形式的插条插入风管两端,然后压实。 3. Air pipe insert type connection : Insert type is connected to rectangular air pipe connection. Insert different types of inserts into the two ends of the air pipe , and then compact.
如散流器静压箱侧送风口等)相连装置时,软臂两端套在连接管外,然后用特制软卡把软管箍紧。 4. Hose connection: Hose connection is mainly used when the air pipe is connected with components ( such as diffuser static pressure box side air outlet, etc. ) , the two ends of the soft arm are sleeved outside the connection pipe, and then a special soft card is used. Tighten the hose.