Dust removal equipment manufacturer metal grinding dust removal plan: The metal dust pollutants generated during the grinding of metal workpieces are respectively conveyed to the dust collector equipment through a spiral pipe for collection, and the air containing metal dust enters the dust collector equipment through a tangential inlet. The washing liquid is injected into Venturi (circulating system) through a nozzle group through a water pump. Using the centrifugal force inside the scrubber, the washing liquid that captures the pollutants is separated from the air stream. The mud-like sediment captured by the water is settled into the sludge tank together with the water. The waste bucket is installed at the bottom of the terminal of the scraping device. The drain valve at the bottom of the mud tank is discharged to the sewage treatment system. The purified exhaust gas comes out of the central outlet pipe and is drawn out by a fan located at the clean air outlet, and is discharged to the atmosphere through a muffler and a chimney. The air discharged from the clean air outlet should meet environmental protection emission standards. A liquid level regulator is set in the sludge tank, and fresh process water is automatically replenished when the liquid level is lower than a certain value, and water replenishment is automatically stopped when the liquid level is higher than a certain value. At the same time, a pump pressure monitoring chain is also set up. The fan has delayed start and stop functions, and overload protection. The motor speed control function is set for the mud scraper.
Yuchen Technology dust removal equipment manufacturers provide customers with free operation training and maintenance. When the customer informs our company to carry out production, our company will send professional engineers to the site to guide the trial training and operation, and provide comprehensive technical support to customers.
Grinding polishing dust removal equipment
Cartridge dust collector