|Industrial dust treatment equipment series|
|Welding fume exhaust gas treatment series|
|Grinding polishing dust removal equipment|
|Stand-alone dust collector|
|Spiral duct and accessories series|
Dongguan dust processing equipment specializes in processing particulate dust and welding fumes generated during production. Application industry: Dust gas treatment and recovery in furniture factory, woodworking processing factory, woodworking polishing workshop, hardware machinery factory, cement factory, pharmaceutical factory, chemical factory, electric power, light industry and other industries.
Features of Dongguan Dust Treatment Equipment :
、本 公司粉尘处理产品产用变频调速，依据车间使用齐整自动调动，比以前的粉尘处理设备节省用电30%-70% 。 1. The company's dust treatment products use variable frequency speed regulation, which is automatically adjusted according to the use of the workshop, saving electricity by 30% -70% compared with the previous dust treatment equipment .
、 东莞粉尘处理设备使用分室停风脉冲喷吹清灰技术，避免了以前脉冲除尘器和分室反吹除尘器的不足点，让清灰能力更强，除尘效率大大提高，排放时浓度低，漏风情况小，能耗更少，占地面积小，运行稳定稳定，投入成本低。 2. Dongguan's dust treatment equipment uses divided-chamber air-stop pulse jet dust cleaning technology, which avoids the shortcomings of the previous pulse dust collector and the divided-chamber reverse blow dust collector, making the dust removal ability stronger, the dust removal efficiency greatly improved, and the concentration during discharge is low. Small air leakage, less energy consumption, small footprint, stable and stable operation, low input cost.
Dust cleaning can refer to: How to clean up dust in the workshop
、由于 使用的分室停风脉冲喷吹清灰系统，只需喷吹一次可达到彻底清灰的效果，这样清灰的周期可以加长，减低了清灰耗量，压气的能耗大大为降小。 3. Because of the air separation pulse spraying ash cleaning system used in the chamber, only one injection can be used to achieve the effect of complete ash cleaning. This way the ash cleaning cycle can be lengthened, the ash cleaning consumption is reduced, and the energy consumption of compressed air is greatly reduced. small. At the same time, the use of cloth bags and pulse valves is relatively reduced, which has doubled the use of filter bags and valve plates.
、 东莞粉尘处理设备使用上面抽袋的设计，换袋的时候拉出骨架，要换的袋丢入箱体下部灰斗，在人工从花板洞处取出，玩善了换袋的操作。 4. The dust treatment equipment in Dongguan uses the design of the bag above. When the bag is changed, the skeleton is pulled out. The bag to be changed is thrown into the ash bucket at the lower part of the box, and it is manually removed from the hole of the flower plate.
、箱体采用气密性设计，密封性好，检查门用优良的密封材料，制作过程中以煤油检漏，漏风率很低。 5. The box adopts air-tight design, good sealing performance, excellent sealing materials for inspection doors, kerosene leak detection during production, and the air leakage rate is very low.
、进 风、出口的风道设计紧凑，气流压力低。 6. The inlet and outlet air ducts are compact in design and have low air pressure.
的关键之处，除尘设备厂家要根据车间粉尘、烟尘的性质、使用场合、粉尘的大小、气体温度、有没有含水、粉尘的浓度和不一样滤料等因素来决定。 7. The design of the purification speed of dust treatment equipment. The speed of purification and filtration is the key to the selection and installation of dust removal equipment. The manufacturer of the dust removal equipment must according to the nature of the dust, soot in the workshop, the use occasion, the size of the dust, the temperature of the gas, and the presence of water , Dust concentration and different filter materials. The particle size of the workshop dust is relatively fine, the humidity is high, the concentration is large, and the viscosity is large. Select a small value.
、 东莞粉尘处理设备过滤滤料是根据粉尘气体的气温、粉尘性质、碱性质、粉尘的粘度、湿度、浓度等的高低、大小来选择。 8. The filter material of Dongguan dust treatment equipment is selected according to the level and size of the dust gas temperature, dust properties, alkalinity, dust viscosity, humidity, and concentration. Normally, when the water content is relatively small, the acid is selected according to the temperature of the gas with dust.
More dust treatment program related content: workshop dust management program
、 东莞粉尘处理设备的 控制仪 ,布袋脉冲除尘器清灰装置采取PLC 电脑 控制仪，分为自动定压、自动定时，手动清灰三种方式来控制。 9 , Dongguan dust processing equipment controller , bag pulse dust collector dust removal device adopts PLC computer controller, divided into automatic constant pressure, automatic timing, manual dust removal three ways to control. 。 Automatic constant pressure control: According to the set pressure difference for automatic control, the pressure difference of the dust removal equipment exceeds the preset value, and the room will be automatically cleaned once . Automatic timing control: According to the set time, every other cleaning cycle, the cleaning will be done one by one indoor. 。 Manual setting: Manual operation control on the operator's operating surface at the site cleans each room one by one in turn, and each room can also be cleaned separately . The operator can decide to control the cleaning method by himself. If the operator does not require it, it will be supplied according to the timing control.
厂家，致力于工业粉尘处理、焊烟废气处理， 以 “追求客户的认为”为第一宗旨，不断创新，生产安全、高效、经济、适用的工业粉尘处理设备，不断创新，建立完善的组织架构，打造工业粉尘处理设备业内良好口碑。 Dongguan Dust Treatment Equipment Yuchen Machinery Technology Dust Removal Equipment Manufacturer is committed to industrial dust treatment and welding fume waste gas treatment. With "pursuing the customer's opinion" as the first purpose, it continuously innovates to produce safe, efficient, economical and applicable industrial dust treatment. Equipment, continuous innovation, establish a sound organizational structure, and create a good reputation in the industrial dust processing equipment industry.