|Industrial dust treatment equipment series|
|Welding fume exhaust gas treatment series|
|Grinding polishing dust removal equipment|
|Stand-alone dust collector|
|Spiral duct and accessories series|
Nine precautions for dust removal equipment are as follows:
1: Cyclone dust collectors on the market cannot handle dust with higher abrasion resistance, but they can be treated after adding abrasion resistant layers.
处理腐蚀性比较强的气体要做好防腐蚀处理。 2: Use wet dust collector to deal with corrosive gas, and do anti-corrosion treatment.
处理 浓度超过 50g ／ m3 的气体， 除尘器厂家设计时要做专门的考虑。 3: Use bag dust removal equipment to treat gas with a concentration exceeding 50g / m3 . Special consideration should be given to the design of the dust collector manufacturer.
对磨损性强的粉尘用 布袋除尘设备处理要减降气流上升速度和滤料的厚度，有经验有实力的除尘设备厂家会进行现场模拟，以防局部流速过快。 4: For the abrasive dust, the bag dust removal equipment should be used to reduce the air flow rising speed and the thickness of the filter material. Experienced and capable dust removal equipment manufacturers will perform on-site simulation to prevent local flow velocity from being too fast.
温超过 120-125 ℃的气体，用 布袋除尘设备就要选用防高温的滤料。 5: If the air temperature exceeds 120-125 ℃, use a bag filter to select high temperature filter material. ℃的气体用高温塑烧板， 如果温度高 过 260 ℃气体 不建议用布袋除尘器。 When the temperature is higher than 75 ℃, use a high-temperature plastic burner. If the temperature is higher than 260 ℃ , it is not recommended to use a bag filter.
6: When dealing with acid, alkali and other gases, we must use the corresponding filter material.
7: Compared with the electrostatic precipitator, the bag filter has a larger area, costs are similar, and the running cost is expensive, but the concentration of emissions is low, which can meet more stringent environmental protection requirements. Therefore, there is a trend of changing the electrostatic precipitator to the bag filter. Yuchen Industrial Dedusting Equipment Manufacturers suggest that new projects do not recommend the use of electric bag composite dust collectors.
Nine precautions for dust removal equipment
塑烧板除尘器 优点是过滤精度高，防水，防油，价格高。 8: Plastic burner plate dust collector has the advantages of high filtration accuracy, water resistance, oil resistance, and high price. ＜ 10 ％ -15 ％ 之间。 The waterproof and oil-proof filter material of the bag filter allows the water content to be between < 10 % and 15 % .
9: At present, the particle layer dust collector project is relatively rare in application.
More types of dust removal equipment, introduction, pictures: what are the dust removal equipment
，同样除尘系统，制造生产使用时的效果不一定一样。 Yuchen industrial dust removal equipment manufacturers remind you that no matter which type of dust collector equipment is, in addition to the above nine precautions , it is also related to the designer's experience and technology of the dust collector manufacturer. On the same occasion, the same dust removal equipment , the same The effect of the dust removal system is not necessarily the same when manufacturing and using.