|Industrial dust treatment equipment series|
|Welding fume exhaust gas treatment series|
|Grinding polishing dust removal equipment|
|Stand-alone dust collector|
|Spiral duct and accessories series|
Guangdong woodworking dust removal equipment manufacturer Yuchen Machinery Technology dust collector equipment has a large filtering area, a small footprint, and low input costs. It has solved the dust problem in workshops for many woodworking processing plants and furniture factories in Guangdong, and has provided workshop wood chips for multiple woodworking manufacturers. Guidance plan for dust treatment opinions.
Guangdong woodworking dust removal equipment manufacturers Woodworking dust removal equipment is used in woodworking grinding and polishing workshops, workshops and production equipment such as sawing machines, drilling machines, and workers during operations such as grinding and polishing of materials, cutting, sanding operations, particle dust, and fine dust. Purification and filtration, which can collect dust that can be recycled.
Notes for selecting woodworking dust removal equipment:
：除尘设备厂家需要对木工加工车间的粉尘量、气体温度、粉尘性质、气体粉尘的浓度、排放出来的标准做相关的技术测量。 1 : Dust removal equipment manufacturers need to make relevant technical measurements on the amount of dust, gas temperature, dust properties, concentration of gas dust, and emitted standards in the woodworking workshop.
：木工除尘器设备的进风口、出风口与风管、灰斗、箱体等等的连接点要保证不漏风、粉尘泄漏的情况，不要影响整体除尘的效率。 2 : The connection points between the air inlets and outlets of woodworking dust collectors and air ducts, ash hoppers, boxes, etc. must be kept free from air leakage and dust leakage, and do not affect the overall dust removal efficiency.
：除尘器设备安装完成后，在正式运行前缓慢加温不要超过 150 度，最好是在这个温度用上 48 个小时后在投入正常的运行，大型木工除尘设备在运行前，要把排气阀打开，把里面的水分排干净，正常运行前在好阀门。 3 : After the installation of the dust collector is completed, slowly warm it up not to exceed 150 degrees before the official operation . It is best to put it into normal operation after using this temperature for 48 hours. Before the large-scale woodworking dust removal equipment is operated, the exhaust The air valve is opened to drain the water inside. Before the normal operation, the valve should be well installed.
：设备使用之前，记得先开引风机，在开鼓风机，停机之前先停止鼓风机。 4 : Before using the equipment, remember to turn on the induced draft fan first, stop the blower before stopping the blower.
：整个除尘器设备要保证灵活严密，不得出现漏气漏风的情况出现。 5 : The entire dust collector equipment must be flexible and tight, and no air leakage or air leakage can occur.
Guangdong woodworking dust removal equipment operation principle
Wood dust in the woodworking workshop is sucked into the dust collector box through the induced draft fan through the pipe. The wood dust is adsorbed and isolated on the filter bag by the filter bag. The clean gas is discharged from the box and the wood chip isolated on the filter bag. The dust was shaken down by the pulse device, and the shavings dust was discharged from the ash hopper under the box.
More related content:
Picture of our woodworking dust removal equipment case:
的问题，请联系我们，我们将竭诚为您提供最优质的服务！ Our company has focused on the field of woodworking dust removal equipment for many years, solving various environmental pollution problems caused by woodworking for the Pearl River Delta and other regions. If you need to consult a solution, understand the price, or have more questions about dust removal equipment , please contact us , We will be happy to provide you with the best service!