|Industrial dust treatment equipment series|
|Welding fume exhaust gas treatment series|
|Grinding polishing dust removal equipment|
|Stand-alone dust collector|
|Spiral duct and accessories series|
The nature of factory dust is diverse. At present, factory dust is generally divided into: metal dust, processed organic dust, processed inorganic dust, wet dust, flammable and explosive dust, etc. So how to treat these factory dust ?
The five methods of factory dust management are as follows:
The first method of factory dust management: bag dust collector
Bag dust collector is the most commonly used dust removal equipment for dust treatment. The principle of this dust collector device is to transport the air with dust from the air pipe to the air inlet above the ash bucket. Under the action of the suction fan, The airflow runs upward, and large dust particles fall into the ash bucket under the influence of inertia. Fine dust is isolated by the filter bag, and the separated clean gas enters the upper case from the upper mouth of the filter bag, and finally exhausts clean air.
The bag filter can treat dust-laden gas from several hundred cubic meters to several million cubic meters per hour. It is a factory dust management equipment with large air volume, stable operation and high purification efficiency.
The second method of factory dust management: wet dust collector
The wet dust collector's method for treating factory dust is to use water for treatment, and use water to separate the dust in the air to achieve the purpose of purifying the gas. The characteristic of wet dust collector is that it can prevent dust explosion and treat some odorous gases. It is a plant dust treatment equipment with low investment cost and small volume. It is suitable for metal products, foundry industry, mining, metallurgy, mechanical building materials, Woodworking industry and other fields!
The third method of factory dust management: electrostatic precipitator
Electrostatic precipitator is a widely used factory dust treatment equipment. It is characterized by high efficiency in dust control, low resistance to equipment, low energy consumption, wide application range, and can handle large-volume flue gas. The investment of the device is relatively large, because its structure is much more complicated than that of other dust removal equipment, and it uses more materials. Its working principle is to use static electricity to capture dust.
The fourth method of factory dust management: stand-alone dust collector
The stand-alone dust collector is a small removable dust removal device built in the workshop developed by our company. This device combines the characteristics of similar foreign products and the current status of domestic enterprises. It is an economical and practical dust built in the workshop. Collecting equipment, the equipment technology is mature, and now it is going to major cities in China.
Advantages of stand-alone dust collector of dust management equipment in our factory:
：体积小、除尘效率高，摆放、移动随意 1 : small size, high dust removal efficiency, free placement and movement
：滤料安装采用吊装式，粉尘更易与滤料分离 2 : The filter material is installed in a hoisting mode, and the dust is more easily separated from the filter material.
：滤料采用旋转式紧固结构，更易更换与人工护理 3 : Filter material adopts rotary fastening structure, which is easier to replace and manual care
：外置与内置式粉尘积灰斗，对产生粉尘能快速进行清理 4 : External and built-in dust ash hopper, can quickly clean up the dust generated
：台湾 30 年风机品牌，振动小，静压高，风量大 5 : Taiwan's 30- year fan brand, with small vibration, high static pressure, and large air volume
Fifth method of factory dust management: filter cartridge dust collector
The filter cartridge dust collector is composed of a main box, a pulse device, a filter cartridge filter device, an air inlet pipe, an exhaust pipe, a dust cleaning device, an electric box control system, etc. The filter cartridge of the filter cartridge dust collector is generally installed on the flower plate. Above, it is fixed with screws and configured with rubber pads for sealing. Its working principle is that after the dust-laden air enters the dust collector, large dust falls down due to inertia, and when small dust enters the filter room, it is isolated by the filter material of the filter cartridge on the surface, and the purified air passes through the exhaust pipe Discharge and finally achieve the purpose of dust treatment.
How does the factory dust control related content: how to deal with the workshop dust
解决方案、了解工厂粉尘治理除尘器或者是需要我司工程师看现场报价、出方案请联系我们 400-622-6298 More factory dust management issues, factory dust solutions, understanding of factory dust management dust collectors, or the need for our engineers to see on-site quotations, please contact us for 400-622-6298