|Industrial dust treatment equipment series|
|Welding fume exhaust gas treatment series|
|Grinding polishing dust removal equipment|
|Stand-alone dust collector|
|Spiral duct and accessories series|
Dust in furniture factories is generally generated by grinding, polishing, and cutting wooden materials. Workers cannot avoid these dusts in production. When handling dust in furniture factories, Dongguan furniture factory dust treatment manufacturers do not only have to meet the standards for the exhaust air. It is also necessary to consider production safety issues, because the dust accumulation of furniture factories may cause the possibility of explosion, so the dust treatment manufacturers of our Dongguan Furniture Factory have the following advantages when designing dust treatment solutions for furniture factories:
：排出的空气达到安监排放标准 1 : Exhaust air meets safety supervision emission standards
：粉尘处理设备带有防爆设置 2 : dust treatment equipment with explosion-proof setting
：结构简单，易于制造、安装和维护管理 3 : Simple structure, easy to manufacture, install and maintain
：设备灵活移动，满足生产需要 4 : Equipment can be flexibly moved to meet production needs
：投资和操作费用成本低 5 : Low investment and operating costs
The dust removal equipment of the dust treatment factory of Dongguan Furniture Factory is mainly composed of an ash bucket, a filter room, a clean room, a bracket, a poppet valve, and a spray ash cleaning device. 单，实用廉价等特点，适用于各种机械加工，冶金建材，矿山采掘的粉尘粗、中级净化。 Dust removal efficiency is high, the processing air volume is large, the performance is stable, the floor space is small, the structure is simple , and it is practical and cheap. It is suitable for various types of mechanical processing, metallurgical building materials, and mining for coarse and intermediate purification of dust.
Working principle of dust treatment in furniture factory:
The dust-laden gas enters the ash hopper from the air duct, and large particles of dust fall directly into the bottom of the ash hopper. The smaller dust enters the filter chamber with the airflow turning up, and is blocked on the outer surface of the filter bag. The purified smoke The air enters the bag, and enters the air outlet through the bag mouth and the clean air chamber, and is discharged through the air outlet. With the continuous filtration, the dust on the outer surface of the filter bag increases continuously, and the resistance of the equipment increases accordingly. When the resistance of the equipment rises to a certain value, a dust cleaning operation should be performed to remove dust on the surface of the filter bag.
Working principle of dust treatment, filtering and cleaning in furniture factory
、过滤原理：带有粉尘气体从进风口进入，经过碰撞斜挡板，气体中大部分粗颗粒粉尘受惯性力作用被隔离出来，直接落入灰斗，带有粉尘尘气体通过灰斗后，进入中箱体的滤筒过滤区，气体穿过滤筒，粉尘被阻留在滤筒外面，净化后的气体经滤筒口进入上箱体后，再由出风口排出。 1. Filtering principle: dust gas enters from the air inlet, and after collision with the inclined baffle, most of the coarse particles in the gas are isolated by inertia and fall directly into the ash bucket. After the dust gas passes through the ash bucket, After entering the filter cartridge filtering area of the middle box, the gas passes through the filter cartridge, and the dust is trapped outside the filter cartridge. The purified gas enters the upper box through the mouth of the filter cartridge and is then discharged through the air outlet.
、清灰原理：随着过滤时间的延续，滤筒上的粉尘层不断积厚，除尘设备的阻力不断上升，当设备阻力上升到设定值或运行时间达到设定值时，清灰装置开始进行清灰，首先第一喷吹管电磁脉冲阀开启，压缩空气以极短促的时间内涌入滤筒，在逆向气流冲刷的作用下，附着在滤筒外表面上的粉尘被剥离落入灰斗中，清灰完毕，电磁脉冲阀关闭，恢复过滤状态，各喷吹管清灰依次进行，从第一次清灰开始至下一次清灰开始为一清灰周期。 2. Dust removal principle: As the filtering time continues, the dust layer on the filter cartridge continues to build up, and the resistance of the dust removal equipment continues to rise. When the resistance of the equipment rises to the set value or the operating time reaches the set value, the dust removal device Begin dust cleaning. First, the first pulse tube electromagnetic pulse valve is opened. Compressed air is poured into the filter cartridge in a very short period of time. Under the action of reverse airflow, the dust attached to the outer surface of the filter cartridge is peeled and falls into the dust. In the bucket, the cleaning is completed, the electromagnetic pulse valve is closed, and the filtering state is restored. The cleaning of each blowing pipe is performed in sequence. It is a cleaning cycle from the first cleaning to the next cleaning.
、粉尘收集经过滤和清灰工作被截留下来的粉尘均落入灰斗，再由灰斗口集中落入卸灰抽屉等排出，设备体积小，过滤精度高，可安装在室内。 3. Dust collection The dust collected after filtering and dust cleaning work falls into the ash hopper, and then is discharged from the hopper to the ash unloading drawer. The equipment has a small volume and high filtering accuracy, and can be installed indoors.
The dust pollution problem in furniture factories has always plagued many wooden processing factories and furniture factories, which not only caused physical and mental health of the workshop employees, but also led to the loss of personnel. More importantly, the environmental protection and safety inspections failed, which caused various problems to the enterprises. The impact of these problems is exactly the thorny problem that most companies need to face.
More related content: How to deal with dust in the workshop
型号、价格或者是让我们的工程师看现场出方案的话，请联系我们， 400-622-6298 我们将竭诚为您提供最优质的服务！ The dust treatment manufacturer of Dongguan Furniture Factory has been focusing on the field of dust removal equipment for furniture factories for many years. It has solved various environmental pollution problems caused by industrial production of dust, smoke and exhaust gas for many well-known furniture factory enterprises. If you need to consult the dust solution of furniture factory, understand the furniture If the model and price of the factory's dust removal equipment or let our engineers see the plan on the spot, please contact us, 400-622-6298 We will be happy to provide you with the best service!