|Industrial dust treatment equipment series|
|Welding fume exhaust gas treatment series|
|Grinding polishing dust removal equipment|
|Stand-alone dust collector|
|Spiral duct and accessories series|
， 因为单机除尘器体积小，产品灵活、投入成本低，维护运行费用小，是很多碳粉行业选择广泛的设备，那么碳粉行业用的集尘器的工作原理是什么？ The dust collector used in the toner industry is generally a single-machine dust collector . Because the single-machine dust collector is small in size, flexible in product, low in input cost, and low in maintenance and operation costs, it is a widely used equipment in many toner industries. What is the working principle of the dust collector?
气体 从 进气口进入 单机 除尘器 的过滤箱 ， 碳粉粉尘 气体透过 单机 除尘器过滤为 为干 净 的 气进， 在从 净气室 的 排气口， 从 风机排走。 The gas with carbon dust enters the filter box of the stand-alone dust collector from the air inlet . The carbon dust gas is filtered through the stand-alone dust collector to be clean air intake. At the exhaust port from the clean room , it is exhausted from the fan. go. 粉尘积附在 滤料 的外表面， 随着运行 不断增加，使 碳粉行业用的集尘器 的阻力不断上升， 这时清灰系统开始运行 。 Toner dust accumulates on the outer surface of the filter material . As the operation continues to increase, the resistance of the dust collector used in the toner industry continues to rise. At this time, the ash cleaning system starts to operate . 0.5-0.7Mpa ）由喷吹管孔眼喷出（称一次风）通过文氏管引导数倍于一次风的周围空气（称二次风）进入除尘器布袋使除尘器布袋在瞬间急剧膨胀，并伴随着气流的反向作用抖落 碳粉粉尘 粉尘，达到 碳粉粉尘 清灰的目的。 The ash cleaning is to start the pulse valve in sequence by the program controller, so that the compressed air ( 0.5-0.7Mpa ) in the air bag is ejected from the nozzle hole (called the primary air), and the surrounding air is guided by the venturi tube several times than the primary air ( (Called secondary air) into the bag of the precipitator so that the bag of the precipitator swells suddenly in an instant, and with the reverse action of the airflow, the toner dust is shaken off to achieve the purpose of cleaning the toner dust .
的优点 Advantages of the dust collector for the toner industry
单机除尘器虽然同现在的设备大同小异，但是以往的设备在寿命和效率方面远不能同现在的除尘设备比及的。 Although the stand-alone dust collector of the dust collector used in the toner industry is similar to the current equipment, the life and efficiency of the previous equipment are far inferior to those of the current dust removal equipment. The previous mobile stand-alone dust collector is not as breathable as the current equipment. This good breathability improves the use time of the device, and our users can be assured of long-term use. Mobile stand-alone dust collector is suitable for different dust locations. In the metallurgical industry, it can operate normally in places where the dust is very serious, but it is necessary to clean up the dust attached to the filter, and to ensure continuous and thorough cleaning. It is also suitable for industrial dust removal with high dust concentration. The function of the stand-alone dust collector is fully reflected in this aspect. 碳粉行业用的集尘器 单机除尘器使得使用起来能很好的达到使用方便的效果。 The compact single-unit dust collector for the mobile toner industry with a small area makes it easy to use.
Dongguan Yuchen Machinery Dust Removal Equipment Manufacturer provides customers in the toner industry with various toner industry pollution control issues, professionally provides dust collector solutions for the toner industry , and creates a clean and beautiful production environment for each toner processing enterprise!