⎝⎛足球正网开户⎞⎠

Dongguan Yuchen Machinery Technology Co., Ltd. Industrial dust removal equipment manufacturers provide industrial dust extraction equipment, dust collector equipment, industrial dust collector equipment, grinding dust removal equipment, polishing dust removal equipment, workshop dust removal equipment, and provide a complete set of design solutions for workshop dust treatment plant dust treatment, Quotation, see on-site service
Dongguan Yuchen Industrial Dedusting Equipment Manufacturer
Provide dust removal plan for grinding and polishing dust removal equipment workshop
Unified national service hotline:
0769-81256298 400-622-6298 0769-81256298

Dust management plan for foundry workshop


The dust management plan of the foundry workshop is generally divided into the following three treatment methods. The dust control plan of the foundry workshop is as follows:


分散治理法方案 Dust treatment plan for foundry workshop 1 , decentralized treatment method plan

 

The solution of the decentralized treatment method is to directly process, collect, and filter the source point of foundry soot dust, and the purification effect is good. The dust industry and dust removal method of the foundry industry must be comprehensively treated. In order to prevent mutual pollution between the various industrial departments, it is necessary to have a solution for each production process that generates dust and exhaust gas.

 

The sand-mixing process, cupola smelting process, mechanical vibration sand-falling process, and artificial sand-clearing process, which are relatively easy to produce dust, should adopt strict dust-proof and dust-removal measures.

 

Appropriate equipment and processes for the recovery and regeneration of used sand during the production process, cleaning processes and equipment for unpacking, sand removal, and shot blasting casting casting, and transportation and collection processes and equipment for raw materials and waste sand should be provided. Dust and dust removal measures.

 

全面治理法 Foundry workshop dust treatment plan 2 , comprehensive treatment method

 

The comprehensive treatment method adopts the layered air supply technology, and the treatment scheme is effective, not affected by the process size, and the overall plant environment can be effectively improved.

In the non-concentrated casting workshop, the overall treatment method can be used for dust removal and ventilation, and the resin sand production core workshop and the resin sand core storeroom. Due to the requirements of process conditions, the overall treatment method can be used to control temperature, humidity, dust and odor.

 

Dust management plan for foundry workshop 3. Bag dust collector treatment plan

 

布袋除尘器铸造厂除尘效率可高 达到 98% 以上; 1. The dust removal efficiency of the baghouse dust collector foundry can reach more than 98% ;
、从粉尘产生,到粉尘收集,只需一套完整的设备 2. From dust generation to dust collection, only a complete set of equipment is needed
、全自动的清灰系统 3.Automatic ash cleaning system
、通风管道布局合理、美观 4. Reasonable and beautiful layout of ventilation ducts
、处理后的气体能直接排放 5.The treated gas can be directly discharged

、能够通过环保局的检测. 6 , can pass the test of the Environmental Protection Agency.


铸造厂车间粉尘治理方案

 

Working principle of bag filter:

 

粉尘的气体从管道进入灰斗上部进风口里面,在风机的引力下 ,铸造厂烟气 气体朝上流动,比较大的粉尘 颗粒 在惯性力的原理下掉落到灰斗下面。 The gas from the dust from the foundry plant enters the upper air inlet of the ash hopper from the pipe. Under the gravity of the fan, the gas from the foundry factory flows upward, and the relatively large dust particles fall below the ash under the principle of inertia. 烟气 粉尘的气体进入中箱体被滤袋隔离,粉尘被隔离在滤袋的表面处,隔离后的干净的气体由滤袋的出口处进入上箱体 ,最后从风机上面的消声器排出 The gas with smoke and dust entering the middle box is isolated by the filter bag, and the dust is isolated at the surface of the filter bag. The isolated clean gas enters the upper box from the outlet of the filter bag , and is finally discharged from the muffler above the fan .

 

Related products: Bag dust removal equipment

 

400-622-6298 ,为您提供更多的 铸造厂车间粉尘治理方案! For more foundry workshop dust management solutions, please call our dust removal equipment manufacturer 400-622-6298 to provide you more foundry workshop dust management solutions!


Dust collector equipment
Dust collector equipment
Industrial dust removal equipment manufacturers_Dongguan Yuchen Machinery Technology Co., Ltd. Copyrightn 2013 Sitemap visits: [ Baidu Statistics ]
Manufacturer of dust removal equipment_Telephone : 0769-8125 6298/81256299 Contact person : Ms. Xie / 13922901739 Sales person of industrial dust removal equipment: Mr. Wang / 13600259680
粤ICP备13067491号-2 * Our company is a dust removal equipment manufacturer integrating scientific research, development and manufacturing. * Technical Support: Dongguan Website Construction [ Background Management ] [ Email Login ] Guangdong ICP No. 13067491-2
必赢真人娱乐 七乐彩 星力捕鱼 欢乐拼三张