|Industrial dust treatment equipment series|
|Welding fume exhaust gas treatment series|
|Grinding polishing dust removal equipment|
|Stand-alone dust collector|
|Spiral duct and accessories series|
如下： Attentions in the design of dust removal equipment manufacturers are as follows:
保证技术先进、造型多样化、结构优化、简单，具有显著的 " 高效、密封、强度、刚度、节能、实用等等技术特性。 1: Ensure advanced technology, diversified shapes, optimized structure, simple, and have significant " high efficiency, seal, strength, stiffness, energy saving, practical and so on.
排放浓度符合环保排放标准或特定的规定，其粉尘或其他有害物的落地浓度不能超过环境排放标准。 2: The emission concentration conforms to environmental protection emission standards or specific regulations. The concentration of dust or other harmful substances on the ground must not exceed the environmental emission standards.
除尘设备厂家的设计技术可以达到行业中上水平。 3: The design technology of dust removal equipment manufacturers can reach the upper level in the industry.
具有配套的技术保障措施，要求有客户案例提供。 4: With supporting technical support measures, customer cases are required.
：拥有相关资质提供，如产品外观专利设计等 5 : Have relevant qualifications, such as product appearance patent design, etc.
When designing the dust removal equipment manufacturers, the design meets the following standards:
(GB 16297-1996) ； Meet the "Integrated Emission Standard for Air Pollutants" (GB 16297-1996) ;
(JGJ141-2004) ； Comply with "Ventilation Pipe Construction Technical Regulations" (JGJ141-2004) ;
BGZ2.1-2007 ） Comply with Occupational Exposure Limits for Hazardous Factors in the Workplace ( BGZ2.1-2007 )
GB12348-2008 ） Meets the "Environmental Noise Emission Standards for Industrial Plants" ( GB12348-2008 )
GB/T5226.1-96 ） Comply with "General Technical Conditions of Industrial Machinery and Electrical Equipment" ( GB / T5226.1-96 )
GBJ87-85 ） Comply with "Noise Control Design Code for Industrial Enterprises" ( GBJ87-85 )
GBZ1-2002 ） Meet the "Design Sanitary Standards for Industrial Enterprises" ( GBZ1-2002 )
The design performance requirements of dust removal equipment manufacturers are as follows:
：除尘设备排放浓度必须保证在环保排放标准以内，作业环境粉尘浓度在卫生标准以内。 1 : The dust concentration of the dust removal equipment must be within the environmental protection emission standard, and the dust concentration in the operating environment is within the hygienic standard.
：粉尘污染治理过程，不能出现二次杨尘，也不可以转移成其他污染性质。 2 : In the process of dust pollution control, secondary poplar dust cannot appear, nor can it be transferred to other pollution properties.
：除尘设备噪声不能超过国家卫生标准和环保标准，应控制在合理范围内。 3 : The noise of the dust removal equipment must not exceed the national health standards and environmental protection standards, and it should be controlled within a reasonable range.
：除尘设备收集的灰尘应配套综合利用措施。 4 : The dust collected by the dust removal equipment should be equipped with comprehensive utilization measures.
Related recommendation: Nine precautions for dust removal equipment
设计时厂家设计时注意事项是每个除尘器厂家需要注意的细节，只有把这些细节做好，才能给客户提供更好的产品，更多 除尘设备厂家设计时注意事项 、和我司案例可以到我司官网查询！ When designing the dust removal equipment manufacturers , the precautions when designing the factory are the details that every dust collector manufacturer needs to pay attention to. Only by doing these details can we provide customers with better products. Cases can be found on our website!