|Industrial dust treatment equipment series|
|Welding fume exhaust gas treatment series|
|Grinding polishing dust removal equipment|
|Stand-alone dust collector|
|Spiral duct and accessories series|
- 工厂锅炉粉尘处理设备- 喷淋脱硫除尘塔 - 排出达标的气体！ Boiler bag dust removal equipment design standards need to meet the "Boiler Air Pollutant Emission Standard", and its process is coal-fired boiler tail gas-smoke pipe - factory boiler dust treatment equipment- spray desulfurization and dust removal tower - exhaust gas that meets the standard!
Process principle of boiler bag dust removal equipment:
Boiler bag dust removal equipment generally consists of upper box, middle box, ash hopper, air inlet and outlet, filter bag, injection system, ash unloading system, ladder, and maintenance platform.
The dust-laden gas enters the filter box from the air inlet of the boiler bag dust removal equipment, and is guided by the ash bucket diversion device. Large particles of dust fall directly into the ash bucket due to the influence of gravity. The fine dust is trapped by the dust. The belt that enters the middle box is adsorbed on the outer surface of the filter bag. The clean gas flows through the center of the filter bag to the upper box, and is discharged into the atmosphere through the exhaust pipe above the fan and muffler. With the continuous operation of the boiler bag dust removal equipment, the dust on the filter bag accumulates more and more. At this time, the pulse spray system is turned on and the blowing is performed. The compressed air is instantly blown to increase the pressure in the filter bag. The dust is blown into the ash hopper and finally discharged from the ash discharge system.
Boiler bag dust removal equipment design standard principles:
认真贯彻执行国家有关环保方针政策，遵守国家及地方的有关法规、规范和标准。 1: earnestly implement the relevant national environmental protection policies and policies, and abide by relevant national and local regulations, norms and standards.
设备的结构要求紧凑、合理、美观、功能分区，方便运行管理。 2: The structure of the equipment is required to be compact, reasonable, beautiful, and functionally partitioned to facilitate operation and management.
设备选型要综合考虑性能、价格因素，设备要求高效节能，噪音低，运行可靠，占地面积少， 维护管理简单，使用寿命长。 3: Equipment selection must comprehensively consider performance and price factors. Equipment requires high efficiency and energy saving, low noise, reliable operation, small footprint, simple maintenance management, and long service life.
Design standard of boiler bag dust removal equipment:
除尘器排放浓度必须保证在环保排放标准以内，作业环境粉尘浓度在卫生标准以内； (1) The dust concentration of the dust collector must be within the environmental protection emission standards and the dust concentration in the operating environment is within the hygienic standards;
粉尘污染治理过程，过能有二次杨尘，也不能转移为其他污染。 (2) In the process of dust pollution control, there can be secondary poplar dust, which cannot be transferred to other pollution.
除尘器噪声不能超过国家卫生标准和环保标准。 (3) The noise of the dust collector must not exceed the national health standards and environmental protection standards.
除尘器收下灰 ( 粉尘 ) 应配套综合利用措施。 (4) The ash ( dust ) collected by the dust collector shall be equipped with comprehensive utilization measures.
Related content: factory boiler dust treatment equipment
查询，或者更多锅炉厂废气、粉尘处理请给我司来电，我司为您提供优质的服务！ For more boiler bag dust removal equipment design standards, please contact our dust removal equipment manufacturers , or for more boiler plant exhaust and dust treatment, please call our company, our company will provide you with quality service!