|Industrial dust treatment equipment series|
|Welding fume exhaust gas treatment series|
|Grinding polishing dust removal equipment|
|Stand-alone dust collector|
|Spiral duct and accessories series|
A good dust collector equipment management solution can effectively solve the dust emission problem of the enterprise, help the enterprise to solve the problem of smoke and dust pollution in the workshop, and improve the production efficiency of the enterprise. Therefore, a good dust collector equipment management solution is a concern for every enterprise Thing.
Dust collector equipment management plan is as follows:
The gas with flue dust enters the filter box from the air inlet of the flue dust management equipment, and under the diversion of the ash guide device, the large particles of dust fall directly into the ash due to their own gravity. Fine dust is sucked into the middle box and is adsorbed and isolated on the outer surface of the filter bag. The clean gas flows through the center of the filter bag to the upper box and is discharged into the atmosphere through the exhaust pipe above the fan and muffler. With the continuous operation of the flue and dust management equipment, more and more dust is on the filter bag. At this time, the pulse spray system is automatically turned on, and the filter bag is blown. The compressed air is instantly blown to increase the pressure in the filter bag. , The dust on the filter bag is sprayed into the ash hopper, and the dust and smoke from the workshop are finally discharged from the ash discharge system.
The dust collector equipment management plan needs to meet the following points:
： 粉尘污染排放浓度必须保证在环保排放标准以内，作业环境粉尘浓度在卫生标准以内； 1 : The dust pollution emission concentration must be within the environmental protection emission standards and the working environment dust concentration must be within the hygienic standards;
： 粉尘污染治理过程，不能有二次杨尘，也不能转移为其他污染。 2 : In the process of dust pollution control, there must be no secondary poplar dust, nor can it be transferred to other pollution.
： 粉尘污染治理方案噪声不能超过国家卫生标准和环保标准。 3 : The noise of dust pollution control schemes must not exceed national health standards and environmental protection standards.
： 粉尘污染治理方案 收下灰 ( 粉尘 ) 应配套综合利用措施。 4 : The dust ( dust ) collected by the dust pollution control plan shall be equipped with comprehensive utilization measures.
净化后的空气排放符合《大气污染物排放限值》 (DB44/27-2001) 二级标准。 The air emission after purification of the dust collector equipment treatment plan complies with the secondary standard of “Air Pollutant Emission Limits” (DB44 / 27-2001) .
《粉尘爆炸危险场所用除尘系统安全技术规范》（ AQ4272-2016 Dust collector equipment treatment plan "Safety Technical Specification for Dust Removal System for Danger of Dust Explosion" ( AQ4272-2016
Design basis of our dust pollution control plan
1. Party A provides relevant technical information
2. Party A's Environmental Impact Assessment
3． Relevant national occupational health and environmental standards
4． Save the actual situation of Party A's site
5． Dust removal equipment manufacturers' past system dust removal experience
More program reference: Casting grinding and dust removal program
为各行业客户提供各种行业除尘器设备治理方案，专业提供粉尘污染治理方案、解决方案和优质的服务，为每一个企业创造一个洁净美好的环境！ Yuchen dust removal equipment manufacturers provide various industry dust collector equipment management solutions for customers in various industries, professionally provide dust pollution treatment solutions, solutions and quality services, and create a clean and beautiful environment for each enterprise!