|Industrial dust treatment equipment series|
|Welding fume exhaust gas treatment series|
|Grinding polishing dust removal equipment|
|Stand-alone dust collector|
|Spiral duct and accessories series|
Dust removal equipment in the dust workshop helps enterprises solve the problem of less dust pollution. Collecting and processing dust from the point where the dust comes out, so as to improve the production efficiency of workers in production and increase more output value for the enterprise. What is the working principle of dust removal equipment in dust workshop ?
The working principle of dust removal equipment in dust workshop is as follows:
The dust gas produced by the workshop enters the dust removal equipment of the dust workshop from the air inlet and is isolated and purified by the filter material. The dust is isolated on the outer layer of the filter material. The purified gas is discharged from the fan through the air outlet.
With the continuous operation of the dust removal equipment in the dust workshop, the isolated dust outside the filter material continues to increase, causing the equipment resistance to continue to increase. Therefore, it must be cleaned to allow the dust sticking to the outside of the filter material to fall. Generally, automatic pulse In the cleaning method, the dust finally falls from the ash bucket to the dust storage point, and is finally processed manually.
We should pay attention to the following points when selecting dust removal equipment in the dust workshop:
First: Know the working conditions of the workshop. For example: the factory uses ordinary cloth bag dust removal. Asphalt mixing station adopts pulse cloth bag for dust removal.
Second: Be clear about the nature of dust in the workshop. For example: the dust is wood dust, stone dust, fiber dust or plastic dust and so on.
Third: Know the temperature of the dust in the workshop. 300 度以下的粉尘，若是高于这个温度那么我们就应该采取降温措施。 The current cartridge-type dust removal without cooling device can handle dust below 300 degrees. If it is higher than this temperature, we should take cooling measures.
Fourth: the model size of the device. The size of the equipment model can be handed over to the engineers of the dust removal equipment manufacturer for site survey and measurement to determine the data. That is, choose the appropriate dust removal equipment for the dust workshop and the appropriate air volume.
Fifth: Where the equipment is placed. If the general equipment is too large, it should be placed outdoors. If it is small, you can choose to install it outside the workshop.
“力”，好的除尘设备厂家更能做到保证风力的情况下还能做到不浪费，为客户节约投入和使用成本！ The working principle of the dust removal equipment in the dust workshop is that it is operated by force, such as wind, pressure, dust removal capacity, etc. A good dust removal equipment manufacturer must be able to clearly know how much "force" the workshop requires Equipment manufacturers can better ensure that there is no waste under wind conditions, saving customers investment and use costs!