|Industrial dust treatment equipment series|
|Welding fume exhaust gas treatment series|
|Grinding polishing dust removal equipment|
|Stand-alone dust collector|
|Spiral duct and accessories series|
Grinding, polishing, machining, welding and tableting machines, granulators, mixing machines, batching, mixing, vibrating screens, pulverizers, etc. during the production process in the workshop will not produce different degrees of smoke and dust. The problem is that these dusts have a great environmental impact on the production workshop and a certain burden on the workers' work. Moreover, the dust floating outside the workshop will also affect the surrounding environment. Therefore, the dust removal of the workshop will be introduced below. Several ways to remove dust from the workshop !
Several methods of dust removal in the workshop are as follows:
A method of dust removal in the workshop: bag dust removal equipment
Bag dust removal equipment is the most commonly used dust treatment equipment for dust treatment. The principle of this dust removal equipment is to transport the air with dust from the air duct to the air inlet above the ash bucket. Under the action of the suction fan, The airflow runs upward, and large dust particles fall into the ash bucket under the influence of inertia. Fine dust is isolated by the filter bag, and the separated clean gas enters the upper case from the upper mouth of the filter bag, and finally exhausts clean air.
The second method of dust removal in the workshop: wet dust collector
The wet dust collector's method for treating factory dust is to use water for treatment, and use water to separate the dust in the air to achieve the purpose of purifying the gas. The characteristic of wet dust collector is that it can prevent dust explosion and treat some odorous gases. It is a plant dust treatment equipment with low investment cost and small volume. It is suitable for metal products, foundry industry, mining, metallurgy, mechanical building materials, Woodworking industry and other fields!
The third method of dust removal in the workshop: electrostatic precipitator
Electrostatic precipitator is a widely used factory dust treatment equipment. It is characterized by high efficiency in dust control, low resistance to equipment, low energy consumption, wide application range, and can handle large-volume flue gas. The investment of the device is relatively large, because its structure is much more complicated than that of other dust removal equipment, and it uses more materials. Its working principle is to use static electricity to capture dust.
The fourth method of dust removal in the workshop: stand-alone dust collector
The stand-alone dust collector is a small removable dust removal device built in the workshop developed by our company. This device combines the characteristics of similar foreign products and the current status of domestic enterprises. It is an economical and practical dust built in the workshop. Collecting equipment, the equipment technology is mature, and now it is going to major cities in China.
结构紧凑，占地位置小，操作简洁方便，产 Yuchen's stand-alone dust collector series is very suitable for lean production, which requires compact structure, small footprint, simple and convenient operation, and
Product investment is small, and it is convenient to place indoors. 99.99% ，排法符合国家排放标准。 The dust removal efficiency is 99.99% , and the discharge method meets the national emission standards.
More product information: stand-alone dust collector
Operation principle of workshop dust removal equipment:
“力”在对车间粉尘进行处理的，这个“力”就是指的就是：吸力、风力、阻力、清灰能力等几大方面，一个好的除尘设备厂家，最基本的是对“力”有着非常专业的算法！ The main operating principle of the dust removal equipment used in the workshop is to use the "force" to deal with the dust in the workshop. This "force" refers to: suction, wind, resistance, dust removal ability, etc., a good dust removal Equipment manufacturers, the most basic is a very professional algorithm for "force"!
The workshop dust removal plan needs to meet the following points:
： 除尘器排放浓度必须保证在环保排放标准以内，作业环境粉尘浓度在卫生标准以内； 1 : The dust concentration of the dust collector must be within the environmental protection emission standard and the dust concentration in the operating environment is within the hygienic standard;
： 粉尘污染治理过程，过能有二次杨尘，也不能转移为其他污染。 2 : In the process of dust pollution treatment, there can be secondary poplar dust, which cannot be transferred to other pollution.
： 除尘器噪声不能超过国家卫生标准和环保标准。 3 : The noise of the dust collector must not exceed the national health standards and environmental protection standards.
： 除尘器收下灰 ( 粉尘 ) 应配套综合利用措施。 4 : The ash ( dust ) collected by the dust collector should be equipped with comprehensive utilization measures.
上门进行测量，我们根据您公司的现场提供技术方案，最后为您报出车间除尘设备的价格。 The above is the basic introduction of some methods of dust removal in some workshops . If you can tell our professional technicians exactly what you need, such as the air volume, power, and processing conditions of the workshop dust collector, or contact our dust removal equipment manufacturer For measurement, we provide technical solutions based on your company's site, and finally quote you the price of the dust removal equipment in the workshop.