⎝⎛足球正网开户⎞⎠

Dongguan Yuchen Machinery Technology Co., Ltd. Industrial dust removal equipment manufacturers provide industrial dust extraction equipment, dust collector equipment, industrial dust collector equipment, grinding dust removal equipment, polishing dust removal equipment, workshop dust removal equipment, and provide a complete set of design solutions for workshop dust treatment plant dust treatment, Quotation, see on-site service
Dongguan Yuchen Industrial Dedusting Equipment Manufacturer
Provide dust removal plan for grinding and polishing dust removal equipment workshop
Unified national service hotline:
0769-81256298 400-622-6298 0769-81256298

Working principle of polishing and dust removal equipment in hardware factory


Hardware polishing and dust removal equipment is generally used in plumbing and sanitary ware, metallurgical casting, hardware auto parts, furniture factory polishing, foundry industry, shoe industry, plastic spraying, machining, electronics factory and other industries. So what is the working principle of hardware dust polishing equipment ?

 

The working principle of polishing dust removal equipment in hardware factory is as follows:

 

在引风机的作用下, 五金厂抛光粉尘气体从灰斗处的进风口进入过滤室,一些颗粒比较大的粉尘颗粒直接落入灰斗。 1: Under the action of the induced draft fan, the polishing dust gas from the hardware factory enters the filter room from the air inlet at the ash hopper, and some large particles of dust fall directly into the ash hopper.

 

剩余 抛光粉尘气体经过滤袋隔离过滤后,从布袋中心口到达净气室,最后由风机排入大气,而五金厂粉尘被粘附在滤袋外表面。 2: The remaining polishing dust gas is isolated and filtered by the filter bag, reaches the clean room from the center of the bag, and is finally discharged into the atmosphere by the fan. The dust from the hardware factory is adhered to the outer surface of the filter bag.

 

随着滤袋表面的粉尘不断增加,设备阻力也随之上升,当达到一定值后,脉冲清灰系统自动开始进行喷吹清灰。 3: As the dust on the surface of the filter bag continues to increase, the resistance of the equipment also rises. When it reaches a certain value, the pulse cleaning system automatically starts spray cleaning.

 

脉冲清灰系统开始工作,依次开启各个脉冲阀,让压缩空气的喷口对滤袋进行喷吹清灰。 4: The pulse dust cleaning system starts to work, and each pulse valve is opened in turn to let the compressed air nozzle spray and clean the filter bag.

 

滤袋在高压空气的作用下突然膨胀,附于袋表的 五金厂抛光粉尘则在反向气流的作用下迅速脱离滤袋落入灰斗,最后粉尘从卸灰阀排出。 5: The filter bag suddenly expands under the action of high-pressure air. The polishing dust of the hardware factory attached to the bag surface is quickly separated from the filter bag and falls into the ash hopper under the action of reverse airflow. Finally, the dust is discharged from the ash discharge valve.

 

喷吹只对滤袋逐排清灰,其它滤袋仍正常进行过滤,不影响整机除尘。 6: Blowing only removes the dust from the filter bags one by one. The other filter bags still filter normally, which does not affect the dust removal of the whole machine.


Dust Treatment Solution for Hardware Factory


五金厂抛光除尘设备的工作原理

 

The working principle of the polishing dust removal equipment of our hardware factory meets the following standards:

 

除尘器排放浓度必须保证在环保排放标准以内,作业环境粉尘浓度在卫生标准以内; 1 : The dust concentration of the dust collector must be within the environmental protection emission standard and the dust concentration in the operating environment is within the hygienic standard;

粉尘污染治理过程,过能有二次杨尘,也不能转移为其他污染。 2 : In the process of dust pollution treatment, there can be secondary poplar dust, which cannot be transferred to other pollution.

除尘器噪声不能超过国家卫生标准和环保标准。 3 : The noise of the dust collector must not exceed the national health standards and environmental protection standards.

除尘器收下灰 ( 粉尘 ) 应配套综合利用措施。 4 : The dust ( dust ) collected by the dust collector should be equipped with comprehensive utilization measures.

 

How much is the price of polishing and dust removal equipment in hardware factory?


Hardware factory polishing polishing dust removal equipment

 

上门进行测量,我们根据您公司的现场提供技术方案,最后为您报出五金厂抛光除尘设备的价格。 The price of the polishing and dust removal equipment of the hardware factory is determined according to the air volume required by the working conditions, the number of dust outlets, and the layout of the pipeline. If you can tell us exactly the dust removal equipment manufacturer you need, Air volume, power, processing conditions and other information, or contact our company's dust removal equipment manufacturers to come to take measurements. We will provide technical solutions based on your company's site, and finally quote you the price of polishing and dust removal equipment in the hardware factory.


五金厂抛光除尘设备的工作原理

 

 

 

Dust collector equipment
Dust collector equipment
Industrial dust removal equipment manufacturers_Dongguan Yuchen Machinery Technology Co., Ltd. Copyrightn 2013 Sitemap visits: [ Baidu Statistics ]
Manufacturer of dust removal equipment_Telephone : 0769-8125 6298/81256299 Contact person : Ms. Xie / 13922901739 Sales person of industrial dust removal equipment: Mr. Wang / 13600259680
粤ICP备13067491号-2 * Our company is a dust removal equipment manufacturer integrating scientific research, development and manufacturing. * Technical Support: Dongguan Website Construction [ Background Management ] [ Email Login ] Guangdong ICP No. 13067491-2
必赢真人娱乐 七乐彩 星力捕鱼 欢乐拼三张