⎝⎛足球正网开户⎞⎠

Dongguan Yuchen Machinery Technology Co., Ltd. Industrial dust removal equipment manufacturers provide industrial dust extraction equipment, dust collector equipment, industrial dust collector equipment, grinding dust removal equipment, polishing dust removal equipment, workshop dust removal equipment, and provide a complete set of design solutions for workshop dust treatment plant dust treatment Quotation, see on-site service
Dongguan Yuchen Industrial Dedusting Equipment Manufacturer
Provide dust removal plan for grinding and polishing dust removal equipment workshop
Unified national service hotline:
0769-81256298 400-622-6298 0769-81256298

How to remove dust from the foundry


How to remove dust from the foundry? In the foundry, a large amount of flue gas is generated when the box is dropped, the sand is returned to the conveyor, and the unloading is carried out. The old sand bucket is used for unloading, the old sand is screened, cooled, and lifted into the warehouse. Dust, if these flue dust adhere to the wall of the tube in the cold, it will be difficult to clean up, so how to remove dust from the foundry?

 

How to remove dust from the foundry? 分散治理法方案 Method 1.Decentralized governance law scheme

 

The solution of the decentralized treatment method is to directly process, collect, and filter the source point of foundry soot dust, and the purification effect is good. The dust industry and dust removal method of the foundry industry must be comprehensively treated. In order to prevent mutual pollution between the various industrial departments, it is necessary to have a solution for each production process that generates dust and exhaust gas.

 

The sand-mixing process, cupola smelting process, mechanical vibration sand-falling process, and artificial sand-clearing process, which are relatively easy to produce dust, should adopt strict dust-proof and dust-removal measures.

 

Appropriate equipment and processes for the recovery and regeneration of used sand during the production process, cleaning processes and equipment for unpacking, sand removal, and shot blasting casting, and transportation, collection processes and equipment of raw materials and waste sand should be configured Dust and dust removal measures.


如何对铸造车间除尘


Foundry sand cleaning and dust removal equipment

 

How to remove dust from the foundry? Method 1.Comprehensive governance law

 

The comprehensive treatment method adopts the layered air supply technology, and the treatment scheme is effective, not affected by the process size, and the overall plant environment can be effectively improved.

In the non-concentrated casting workshop, the overall treatment method can be used for dust removal and ventilation, and the resin sand production core workshop and the resin sand core storeroom. Due to the requirements of process conditions, the overall treatment method can be used to control temperature, humidity, dust and odor.

 

How to remove dust from the foundry? Method 3: Treatment plan of bag filter

 

布袋除尘器铸造厂除尘效率可高 达到 98% 以上; 1. The dust removal efficiency of the baghouse dust collector foundry can reach more than 98% ;
、从粉尘产生,到粉尘收集,只需一套完整的设备 2. From dust generation to dust collection, only a complete set of equipment is needed
、全自动的清灰系统 3.Automatic ash cleaning system
、通风管道布局合理、美观 4. Reasonable and beautiful layout of ventilation ducts
、处理后的气体能直接排放 5.The treated gas can be directly discharged

、能够通过环保局的检测. 6 , can pass the test of the Environmental Protection Agency.


如何对铸造车间除尘

 

Working principle of bag filter:

 

的气体从管道进入灰斗上部进风口里面,在风机的引力下 ,铸造厂烟气 气体朝上流动,比较大的粉尘 颗粒 在惯性力的原理下掉落到灰斗下面。 Casting and falling sand in the foundry, returning sand conveying, unloading, old sand bucket lifting and unloading, old sand screening, cooling, lifting and storage, soot and gas generated from sand mixing and pulverized coal combustion enter the upper part of the ash bucket through the pipeline and enter Inside the tuyere, under the gravity of the fan , the foundry smoke gas flows upward, and the relatively large dust particles fall below the ash bucket under the principle of inertial force. 烟气 粉尘的气体进入中箱体被滤袋隔离,粉尘被隔离在滤袋的表面处,隔离后的干净的气体由滤袋的出口处进入上箱体,最后从风机上面的消声器排出 The gas with smoke and dust enters the middle box and is isolated by the filter bag. The dust is isolated at the surface of the filter bag. The isolated clean gas enters the upper box from the outlet of the filter bag and is finally discharged from the muffler above the fan. .


More related: fume and dust management in foundry

 

How to remove dust from the foundry? 提供看现场出设计方案、提供报价等相关服务,欢迎致电400-622-6298 ,我司为您提供更多的 铸造车间除尘相关咨询,帮你解决铸造车间烟气粉尘污染问题! More foundry workshop dust removal solutions and quotations require our dust removal equipment manufacturers to provide on-site design solutions, provide quotations and other related services. Welcome to call 400-622-6298 . Our company will provide you with more foundry dust removal related consultation. To help you solve the dust pollution problem in the foundry!

 

Dust collector equipment
Dust collector equipment
Industrial dust removal equipment manufacturers_Dongguan Yuchen Machinery Technology Co., Ltd. Copyrightn 2013 Sitemap visits: [ Baidu Statistics ]
Manufacturer of dust removal equipment_Telephone : 0769-8125 6298/81256299 Contact person : Ms. Xie / 13922901739 Sales person of industrial dust removal equipment: Mr. Wang / 13600259680
粤ICP备13067491号-2 * Our company is a dust removal equipment manufacturer integrating scientific research, development and manufacturing. * Technical Support: Dongguan Website Construction [ Background Management ] [ Email Login ] Guangdong ICP No. 13067491-2
必赢真人娱乐 七乐彩 星力捕鱼 欢乐拼三张