⎝⎛足球正网开户⎞⎠

Dongguan Yuchen Machinery Technology Co., Ltd. Industrial dust removal equipment manufacturers provide industrial dust extraction equipment, dust collector equipment, industrial dust collector equipment, grinding dust removal equipment, polishing dust removal equipment, workshop dust removal equipment, and provide a complete set of design solutions for workshop dust treatment plant dust treatment Quotation, see on-site service
Dongguan Yuchen Industrial Dedusting Equipment Manufacturer
Provide dust removal plan for grinding and polishing dust removal equipment workshop
Unified national service hotline:
0769-81256298 400-622-6298 0769-81256298

How to design dust storage equipment for dust removal equipment


How to design ash storage bin for dust removal equipment is as follows:


用于电炉收得的粉尘时,其容积通常不少于电炉两天连续生产时出尘量。 1: When used for the dust collected by the electric furnace, its volume is usually not less than the amount of dust produced during the continuous production of the electric furnace for two days.


要设置料位计,能反映粉尘量的多少,并与输送系统进行连锁。 2: A level gauge should be set up, which can reflect the amount of dust and interlock with the conveying system.


如要计量收尘量时,则要采用称量装置。 3: If you want to measure the amount of dust collected, you need to use a weighing device.


顶头需设置简易灰袋除尘器或设置排气管与除尘器管道连接。 4: A simple ash bag dust collector is required at the top or an exhaust pipe is connected to the dust collector pipe.

What is the working principle of dust removal equipment


除尘设备如何设计贮灰仓


在灰斗外壁的适当处宜设助灰防闭塞装置,有空气炮或振动电机。 5: An ash-assisted anti-blocking device should be provided at an appropriate place on the outer wall of the ash hopper, with an air cannon or a vibration motor.

 

贮灰仓的储灰量需按 24~48h 的粉尘量来计算,或按运尘车 1~2 次运输尘量确定。 6: The amount of ash stored in the ash storage bin needs to be calculated according to the amount of dust in the 24-48h period, or determined according to the amount of dust transported by the dust truck once or twice.

 

贮灰仓一般设计成圆筒形,其高径比约为 1 7: The ash storage bin is generally designed in a cylindrical shape, and its height-diameter ratio is about 1 . For loose granular dust, the ash storage bin can be designed higher;

For dust with large density, high viscosity and fine particles, the ash storage bin can be designed shorter.

 

贮灰仓的灰斗夹角视粉尘安息角而定,一般比粉尘安息角小 20~50 8: The angle of the ash bucket of the ash storage bin depends on the dust repose angle, which is generally 20-50 smaller than the dust repose angle .

 

运尘车采用真空吸尘车时,储灰仓下部应配置 XY15J 型吸引装置;采用罐式卡车时,应配置 3GY 型吸引装置。 9: When the dust truck is a vacuum cleaner, the lower part of the ash storage bin should be equipped with a XY15J suction device; when using a tank truck, a 3GY suction device should be equipped . In the case of dust-free unloading, in order to avoid dust flying to pollute the environment, the unloading valve is used to unload the ash directly from the dust truck, and at the same time, a dust suction cover is set around the unloading valve.

 

防棚灰装置有空气泡和振打电机两种,对黏而细的粉尘以空气泡为宜。 10: There are two types of ash prevention devices: air bubbles and vibration motors. Air bubbles are suitable for sticky and fine dust.

More recommendations: What are the models of electrostatic precipitator equipment in the workshop

 

的贮灰仓是除尘输灰系统中储存粉尘的必备装置。 The ash storage bin of the dust removal equipment is an indispensable device for storing dust in the dust removal ash conveying system. It consists of main equipment and auxiliary equipment. The main equipment includes ash bucket, cylinder, frame, ladder platform, gas-solid separation device, shed ash protection device and level gauge, etc .; auxiliary equipment includes plug-in valve, ash discharge valve, dust suction device, humidifier and halo car Wait. The ash storage room of the dust removal equipment also needs to be equipped with ash discharge nozzles, humidifiers, automobile transportation and other related settings!

 

 

Dust collector equipment
Dust collector equipment
Industrial dust removal equipment manufacturers_Dongguan Yuchen Machinery Technology Co., Ltd. Copyrightn 2013 Sitemap visits: [ Baidu Statistics ]
Manufacturer of dust removal equipment_Tel : 0769-8125 6298/81256299 Contact person: Miss Xie / 13922901739 Sales person of industrial dust removal equipment: Mr. Wang / 13600259680
粤ICP备13067491号-2 * Our company is a dust removal equipment manufacturer integrating scientific research, development and manufacturing. * Technical Support: Dongguan Website Construction [ Background Management ] [ Email Login ] Guangdong ICP No. 13067491-2
必赢真人娱乐 七乐彩 星力捕鱼 欢乐拼三张