|Industrial dust treatment equipment series|
|Welding fume exhaust gas treatment series|
|Grinding polishing dust removal equipment|
|Stand-alone dust collector|
|Spiral duct and accessories series|
Nowadays, the pressure of environmental protection is intensifying, and enterprises must pay attention to and deal with the dust pollution problems in industrial production. Therefore, the configuration of dust removal equipment has become the choice of many enterprises. However, the solution of this problem does not seem to be so simple. It affects the filtration efficiency of bag dust removal equipment. It is a very important point in selecting a bag. So how to choose a bag dust removal device?
How to choose filter bag for bag dust removal equipment is as follows:
Many manufacturers of dust removal equipment have more or less problems in the actual use of filter bags: for example, during the dust removal process, the electrostatic phenomenon of the powder is seriously agglomerated; the powder has high water content, and it is difficult to separate.
“不给力”，归根结底是除尘滤材的选择问题。 However, most of these phenomena are not caused by the quality of the dust removal equipment. According to the feedback and help from these companies, it can be seen that the reason why their dust removal equipment is so "unpowered" is in the final analysis the choice of dust filter materials. What pot is equipped with what cover, different filter materials must be configured for different working conditions, so professional dust removal technology solutions are particularly important.
The factors to be considered in the selection of filter bags for bag dust removal equipment are:
、粉尘的特性：粉尘的颗粒粒径，粉尘的浓度（是否会产生静电、爆）等等； 1. Dust characteristics: the particle size of the dust, the concentration of the dust (whether static electricity or explosion will occur), etc .;
、温度：可分为常温，高温； 2. Temperature: It can be divided into normal temperature and high temperature;
、湿度，水分，含氧量，酸碱度； 3 , humidity, moisture, oxygen content, pH;
、粉尘过滤精度要求； 4 , dust filtration accuracy requirements;
、除尘器的过滤风速，压差，阻力 5. Filtering wind speed, pressure difference and resistance of dust collector
An analogy: For example, a new energy material company used the original Flumex filter bag for the equipment used in the drying process after mining the graphite ore. In the dust removal process, it is often difficult to clean the filter bag, powder bags, and clogging. For other problems, the filter bag must be replaced every three months on average.
After surveying the actual working conditions, we analyzed that this phenomenon was caused by poor filter material selection (poor air permeability, large pressure difference, high energy consumption, and low dust filtration effect), so we proposed The solution to replace the filter bag with a filter cartridge.
The biggest difference between the filter cartridge and the traditional filter bag is that it uses a folded filter bag. 2~3 倍，因此同样规格的滤筒高度比原滤袋缩小将近一半，使得除尘箱体内的粉尘能够充分地流动，增大了粉尘的沉降空间。 The filter area of the folded filter bag is 2 to 3 times that of the same cloth bag . Therefore, the height of the filter cartridge of the same specification is reduced by nearly half compared with the original filter bag, so that the dust in the dust collection box can fully flow and increase the dust sedimentation space.
More product information: What are the bag dust removal equipment
的企业网站上查询更多！ How to choose filter bags for bag dust removal equipment? After reading the introduction of Yuchen dust removal equipment manufacturers above, everyone should know how important it is to choose the right filter material for dust removal equipment. Be sure to know the characteristics and temperature of dust when selecting the filter material. , Humidity, moisture, resistance, etc. For more related information, you can check more on the corporate website of our dust removal equipment manufacturer !