|Industrial dust treatment equipment series|
|Welding fume exhaust gas treatment series|
|Grinding polishing dust removal equipment|
|Stand-alone dust collector|
|Spiral duct and accessories series|
The requirements for the transformation and manufacturing of steel plant dust removal equipment manufacturers are as follows:
本体规划密封、紧固 ,衔接件的尺度合作公役达到国家标准公役和合作中规定的精度。 1: The main body of the steel plant's dust removal equipment is planned to be sealed and fastened , and the scale of the joint service of the joint parts reaches the accuracy specified in the national standard service and cooperation.
2: Complete set of equipment for dust removal equipment of the steel plant, including injection system, air-blocking cannon, supporting flanges for inlet and outlet ducts, fan inlet valves, fan damping equipment, import and export soft connection and supporting flanges, dust collector control cabinets, fans Rain cover, escalator platform, dust collector legs and related testing instruments, meters and signal display equipment.
壁板制造要求平整 ,不得歪曲,对角线差错小于5mm,现场装置时,柱子和壁板的垂直度差错小于5mm,运送中部件变形者需校对。 3: The wallboard manufacturing requirements are flat and must not be distorted. The diagonal error is less than 5mm. When the field device is installed, the verticality error of the column and the wallboard is less than 5mm. The deformation of the parts during transportation needs to be proofread.
花板开孔选用冲压工艺 ,位置要求精确,与理论位置的差错不得大于±1mm。 4: The punching process of the flower plate is selected by stamping technology . The position must be accurate, and the error from the theoretical position must not be greater than ± 1mm.
花孔板厚度 ≥6mm,花板平面度<1.5/1000,对角线长度差错<3mm.有必要选用冲制工艺加工。 5: The thickness of the perforated plate is ≥6mm, the flatness of the perforated plate is <1.5 / 1000, and the diagonal length error is <3mm. It is necessary to choose a punching process.
接连焊接选用二氧化碳维护气密性焊接 ,并进行没有渗漏实验。 6: Continuous welding adopts carbon dioxide to maintain airtight welding , and conducts no leakage test.
7: The primary components of the blowing system will be pre-assembled.
除尘器笼骨选用主动流水线制造 ,焊接点结实,无毛刺,确保笼骨耐磨、耐蚀。 8: The cage of the dust collector is made by an active assembly line , and the welding points are strong without burrs to ensure that the cage bone is wear-resistant and corrosion-resistant.
袋笼应联接结实 ,外表润滑,并作防腐处理;袋笼应拆装便利,装置后的滤袋底部应有适宜的距离,相互不得触摸。 9: The bag cage should be solidly connected , the surface should be lubricated, and treated with anticorrosion; the bag cage should be easy to disassemble, and the bottom of the filter bag behind the device should have a suitable distance and must not touch each other.
顶盖选用剪冲密封顶盖 ,分量、巨细合适人工敞开。 10: The top cover of the dust removal equipment of the steel plant is selected to be a shear punched top cover . The weight and size are suitable for manual opening.
除尘器滤袋应便利拆装、密封性好 ,装置可靠性高,合理剪裁,尽量削减拼缝。 11: The filter bag of the dust collector should be easy to disassemble, good sealing , high reliability of the device, reasonable cutting, and try to reduce the seam. At the splicing place, the stacking overlap width is not less than 10mm.
集料箱选用风动运送 ,歪斜视点不小于20度,再经过反转下料阀将料排出。 12: The collection box of the dust removal equipment of the steel plant is selected to be transported by air , and the oblique viewpoint is not less than 20 degrees, and then the material is discharged through the reverse feeding valve.
The requirements for the transformation and manufacturing of dust removal equipment manufacturers of steel plants need to meet the following environmental protection emission standards:
(GB 16297-1996) ； Meet the "Integrated Emission Standard for Air Pollutants" (GB 16297-1996);
(JGJ141-2004) ； Comply with "Ventilation Pipe Construction Technical Regulations" (JGJ141-2004);
BGZ2.1-2007） Meet the Occupational Exposure Limits for Harmful Factors in the Workplace ( BGZ2.1-2007)
GB12348-2008） Comply with "Environmental Noise Emission Standards for Industrial Plants" ( GB12348-2008)
GB/T5226.1-96） Comply with "General Technical Conditions for Electrical Equipment of Industrial Machinery" ( GB / T5226.1-96)
GBJ87-85） Comply with "Code for Design of Industrial Enterprise Noise Control" ( GBJ87-85)
GBZ1-2002） Comply with "Design Sanitary Standards for Industrial Enterprises" ( GBZ1-2002)
Related recommendations: classification and selection of dust removal equipment
提供工业吸尘、工业除尘、焊烟净化、油雾净化、大型布袋除尘、联机系统、配套配件的完整生产制造体系，更多钢厂除尘设备厂家改造制造要求 、设计方案，需要致电联系我们！ Yuchen dust removal equipment manufacturers provide a complete production and manufacturing system for industrial dust collection, industrial dust removal, welding fume purification, oil mist purification, large bag dust removal, online systems, and supporting accessories. More steel factory dust removal equipment manufacturers have transformed their manufacturing requirements and design plans. Need to call us!