Woodworking dust removal equipment plays the role of dust collection and dust collection in the furniture industry, wood processing plants, and wood products, allowing employees to operate normally during production, without being troubled by wood dust, so that production efficiency is further improved. Employees are physically and mentally healthy. Woodworking dust removal equipment also improves the safety hazards of factory fires and solves the impact of surrounding environmental pollution. The details of woodworking dust removal equipment are as follows: After the woodworking dust removal equipment sucks the dusty air into the middle box, the air passes through the filter bag, and the purified gas enters the upper box and is discharged by the fan. Dust is trapped on the outer wall of the filter bag, part of it falls into the ash hopper by gravity, and the other part is attached to the outer wall of the filter bag, forming the addition of equipment resistance. In order to ensure the normal operation of the equipment, the filter bag must be back blown and cleaned in time to keep the filter bag resistance within the limit.
Woodworking dust removal equipment includes three systems: pipeline system, fan system and filtration system. In these three systems, the structure and function of different equipment are different, but the most basic principles are the same, just like people wearing masks. The pipe connects the woodworking machinery and the filtering system, and the fan operation causes the pipe to vacuum suction. The most important thing is the function of fan equipment and filter bag.
Details of woodworking dust removal equipment are as follows The fan equipment is calculated according to the number of machines in the production workshop. This requires professional personnel to calculate the equipment so that the air volume of the filter interface of each machine reaches a common level to perform useful dust removal. Dust removal filter bags should be selected according to different environments, and the nature of dust in different carpenter workshops is different. When planning a ventilation system with natural gas or combustible dust, it is necessary to adopt hunting application to prevent blasting. 1. Causes of Blasting Blasting of combustibles is caused by the violent oxidation reaction of combustibles and oxygen in the air. The first stage of this reaction, at some addresses, constitutes the temperature condition x at which the combustible molecules and the adjacent oxygen molecules have an oxidation reaction. In the second stage, the heat generated by the oxidative reaction occurred in some addresses, and the surrounding supplies and air mixture quickly caused the oxidative reaction. As a result of the hinged reaction, in a very short period of time, the flammable materials in the entire space have oxidized reactions, and the hottest basins and incineration products, which greatly increase the gas pressure, constitute a blast.
2. Explosion protection method of ventilation system The main reason for the explosion caused by the ventilation system is that the concentration of combustibles in the system exceeds the blasting concentration. The Tongfeng system is too close to the fire source or there is a spark, such as sparks caused by electric sparks and metal bumps .
Related Product Recommendations: Bag Dust Collector in Furniture Factory Working principle of woodworking dust removal equipment: The air flow with wood dust particles is sent to the deflection bin of the woodworking dust removal equipment through a fan. The air flow decreases in speed under the effect of the deflector. The heavier wood dust particles fall into the ash bin due to the effect of gravity. Others are lighter and finer. The dust is adsorbed on the surface of the filter bag upwards with the air flow. After filtering through the cloth bag, the clean gas enters the exhaust chamber and is discharged to the outside. As the filtering conditions continue, more and more dust will accumulate on the surface of the filter bag. Correspondingly, the operating resistance of the system will be increased, and the dust removal power of the system will be reduced. To this end, this system is equipped with an active pulse dust cleaning device This set of equipment is composed of pulse controller, pulse valve, speed coupling, steam drum and air jet tube. According to the characteristics of wood chips, the pulse amplitude and pulse frequency can be set on the pulse controller. After the pulse amplitude and frequency are set, during the operation, the system will actively finish the dust removal of the filter bag, and then greatly increase the same filtering power and extend the service life of the filter bag. After the development of modern society, Yuchen Woodworking Dust Removal Equipment is already a very mature product. It can help woodworking processing plants to solve the problem of industrial dust pollution, and also meet environmental protection emission standards. It has been adopted by many wood processing factories, furniture factories, Wood polishing workshops are widely used.
Yuchen woodworking dust removal equipment is easy to operate. After the manufacturer has completed the installation and commissioning, the operator can quickly get started under the guidance of a simple site. Just turn on the light-on button when the machine is turned on to ensure that the gas source is stable and the equipment starts to operate normally. There is no need to wait for someone during the operation, and it runs fully automatically.
Related product recommendation: Woodworking dust removal equipment
为您提供更多的咨询！ For more detailed introduction of woodworking dust removal equipment, product model, working principle, price and other related questions of woodworking dust removal equipment company, please call 400-622-6298 our dust removal equipment manufacturer to provide you with more consultation!