|Industrial dust treatment equipment series|
|Welding fume exhaust gas treatment series|
|Grinding polishing dust removal equipment|
|Stand-alone dust collector|
|Spiral duct and accessories series|
The dust generated by the polishing workshop floats in the workshop, which brings certain harm to the body of the polishing workers. Long-term absorption of the polishing polishing dust can also cause diseases such as respiratory tract and lung diseases, and some of the polishing dust are metallic dust. There is also the possibility of dust explosion, which directly affects the personal safety of the operator. Therefore, it is very important to remove dust in the grinding workshop. Here are some methods to remove the dust in the grinding workshop.
Several methods of dust removal in the grinding workshop are as follows:
A method of dust removal in the grinding workshop: bag dust removal equipment
Bag dust removal equipment is the most commonly used dust treatment equipment for dust treatment. The principle of this dust removal equipment is to transport the air with dust from the air duct to the air inlet above the ash bucket. Under the action of the suction fan, The airflow runs upward, and large dust particles fall into the ash bucket under the influence of inertia. Fine dust is isolated by the filter bag, and the separated clean gas enters the upper case from the upper mouth of the filter bag, and finally exhausts clean air.
The second method of dust removal in the grinding workshop: wet dust collector
The wet dust collector's method for treating factory dust is to use water for treatment, and use water to separate the dust in the air to achieve the purpose of purifying the gas. The characteristic of wet dust collector is that it can prevent dust explosion and treat some odorous gases. It is a plant dust treatment equipment with low investment cost and small volume. It is suitable for metal products, foundry industry, mining, metallurgy, mechanical building materials, Woodworking industry and other fields!
More product recommendations: stainless steel polishing and dust removal equipment
The third method of dust removal in the grinding workshop: stand-alone dust collector
The stand-alone dust collector is a small removable dust removal device built in the workshop developed by our company. This device combines the characteristics of similar foreign products and the current status of domestic enterprises. It is an economical and practical dust built in the workshop. Collecting equipment, the equipment technology is mature, and now it is going to major cities in China.
Related Recommendations: Polishing and Dust Removal Equipment
在打磨抛光 行业上具有 非常丰富 的经验。 Yuchen dust removal equipment manufacturers have very rich experience in the polishing industry . 连接 车间 工位 上面， 将局部产生的 粉 尘 的 源点控制在 吸尘 罩内，可 以有效的对 加工过程中产生的粉尘和细小颗粒物 进行抽取 。 The polishing and dust removal equipment is directly connected to the workshop station , and the source of locally generated dust is controlled in the dust extraction hood, which can effectively extract the dust and fine particles generated during processing . 料 设计， 可以 提高使用寿命，对颗粒物的吸收效率高，并通过专业的化学过滤器有效去除废气中的有毒、有害气体。 The large-capacity filter material design can improve the service life, high absorption efficiency of particulate matter, and effectively remove toxic and harmful gases in the exhaust gas through a professional chemical filter. ，更多打磨车间除尘几个办法相关问题，欢迎致电我司，为您提供更多的信息！ In the end, clean and unpolluted air is discharged from the air outlet . There are more related issues about dust removal methods in the grinding workshop. Welcome to call our company to provide you with more information!