|Industrial dust treatment equipment series|
|Welding fume exhaust gas treatment series|
|Grinding polishing dust removal equipment|
|Stand-alone dust collector|
|Spiral duct and accessories series|
Workshop dust has always plagued many production enterprises. Workshop dust reduces the visibility of the workshop, causing certain personal safety impacts on workers, and the workshop dust drifting in the nearby living environment will also have a certain impact on residents. Therefore, workshop dust It is a matter that every enterprise needs to take relevant measures to deal with. Here are some methods to deal with the dust treatment methods in the workshop.
Several methods of dust treatment in the workshop 1: Control the problem of dust in the workshop
When the dust in the workshop cannot be sealed and cannot be sealed well, when the dust enters the workshop building, a dust removal device such as an electric sprayer or a dust removal device can be installed at an appropriate place. The sprayer sprays water mist to the workshop to allow the dust to settle. Dust sucked away.
Several methods of dust treatment methods in the workshop 2: Design dust cover to control dust
Spraying water mist in the workshop affects the workers' production efficiency, which is rarely used in general enterprises. More companies choose to design a dust hood at the source of the dust to control the dust. Dust removal equipment manufacturers design a dust hood at the production point. When dust is generated, it is directly drawn away by the suction generated by the fan of the dust removal equipment. This method has high efficiency. And no workers need to clean and clean up the workshop again.
Several methods of workshop dust treatment method 3: What is the structure of the dust removal equipment for handling workshop dust?
The dust removal equipment for dust treatment in the workshop is composed of various components such as a suction fan, a dust collector equipment box, a purification filtering device, a dust removal pipe, a dust suction cover and the like.
Several methods of dust treatment in the workshop 4: How does the dust removal equipment for the treatment of workshop dust work?
The dust removal equipment for processing workshop dust is suitable for workshops, machine tool rooms, grinding and polishing workshops, etc. It can suck the dust produced in the workshop through the dust hood and then pass through the air duct to the purification filter device to separate the dust and gas in the air. , Let the workshop dust fall to the gray car, and the clean gas is discharged from the exhaust pipe, and the discharged gas reaches the environmental protection emission standard.
The dust treatment in the workshop is generally composed of a main unit for dust removal, a dust suction duct, a dust inlet, a dust extraction fan, a filtering system, and a dust-receiving system. Inside the workshop. 的除尘器设备占地面积少、简单、方便，避免了灰尘带来的二次污染，大程度的保证了室内环境。 The main unit of the dust collector is connected to the suction socket pipe of one station through the suction pipe embedded in the wall. When the equipment is operating, a supervisor is connected to each branch pipe. The smoke, dust and harmful gases in the workshop are strictly sealed by the wind. Pipes, suck the flue gas dust into the box of the main body of the dust collector, isolate it with filter material, and finally handle the collected dust manually. The dust collector equipment of Yuchen Dust Removal Equipment Manufacturer covers a small area, is simple and convenient , To avoid secondary pollution caused by dust, to a large extent guarantee the indoor environment.
Related Recommendations: Polishing and Dust Removal Equipment
For more methods of workshop dust treatment methods and workshop dust treatment solutions, please call Yuchen Dust Removal Equipment Manufacturers. Our company will provide you with more comprehensive treatment methods!