|Industrial dust treatment equipment series|
|Welding fume exhaust gas treatment series|
|Grinding polishing dust removal equipment|
|Stand-alone dust collector|
|Spiral duct and accessories series|
Grinding workshops produce a large amount of dust when grinding and polishing workpieces. These dusts have a certain impact on the environment in the grinding workshop. The industries that need to be improved in the grinding workshop are: metal grinding and polishing workshops, hardware machinery factories, furniture Woodworking workshop, foundry and gold industry, power building materials, etc. Here are some suggestions for improvement of polishing workshops and improvement plans for polishing workshops!
Suggestions for improving the sanding shop are as follows:
The gas with the grinding workshop enters the filter box from the inlet of the treatment equipment of the grinding workshop, and is guided by the ash bucket diversion device. The dust of the grinding workshop with large particles falls directly into the ash bucket due to its own gravity. Fine dust is sucked into the middle box and is adsorbed and isolated on the outer surface of the filter bag. The clean gas flows through the center of the filter bag to the upper box and is discharged into the atmosphere through the exhaust pipe above the fan and muffler. With the continuous operation of the dust management equipment in the grinding workshop, the dust on the filter bag is increasing. At this time, the pulse spray system is automatically turned on to blow the filter bag. The compressed air is instantly blown to increase the pressure in the filter bag. , The dust on the filter bag is sprayed into the ash hopper, and the dust in the grinding workshop is finally discharged from the ash discharge system.
Suggestions for improvement of the powder grinding workshop should meet the following points:
：粉尘污染排放浓度必须保证在环保排放标准以内，作业环境粉尘浓度在卫生标准以内； 1 : The dust pollution emission concentration must be within the environmental protection emission standards and the working environment dust concentration must be within the hygienic standards;
：粉尘污染治理过程，不能有二次杨尘，也不能转移为其他污染。 2 : In the process of dust pollution control, there must be no secondary poplar dust, nor can it be transferred to other pollution.
：粉尘污染治理方案噪声不能超过国家卫生标准和环保标准。 3 : The noise of dust pollution control schemes must not exceed national health standards and environmental protection standards.
：粉尘污染治理方案收下灰 ( 粉尘 ) 应配套综合利用措施。 4 : The dust ( dust ) collected by the dust pollution control plan shall be equipped with comprehensive utilization measures.
净化后的空气排放符合《大气污染物排放限值》 (DB44/27-2001) 二级标准。 The improvement of the polishing workshop recommended that the purified air emissions meet the secondary standards of the “Air Pollutant Emission Limits” (DB44 / 27-2001) .
《粉尘爆炸危险场所用除尘系统安全技术规范》《 AQ4272-2016 》 Recommendations for improvement of grinding workshop "Safety Technical Specification for Dust Removal System for Danger of Dust Explosion" " AQ4272-2016 "
Related Product Recommendations: Polishing and Dust Removal Equipment
官网查询，我司提供打磨车间全套方案，欢迎来电咨询！ For more suggestions on the improvement of the polishing workshop, please visit the official website of our company's dust removal equipment manufacturers . Our company provides a complete set of polishing workshop solutions. Welcome to inquire!