|Industrial dust treatment equipment series|
|Welding fume exhaust gas treatment series|
|Grinding polishing dust removal equipment|
|Stand-alone dust collector|
|Spiral duct and accessories series|
What is the dust collector of Guangdong dust collector manufacturers?
Collection device for grinding operation, cutting operation, cutting operation, feeding operation, grinding and polishing.
, 广泛使用集尘器。 Dust collectors are widely used as equipment for handling flue dust . The dust is separated from the gas phase by a dust collector, and then the clean air is discharged from the process system to the atmosphere; or in a local air induction system, the dust in the air is removed by a dust collector to make the discharged air meet the standards and meet the requirements. Environmental requirements.
What are the main parameters of the dust collector?
In order to effectively determine the quality of the product during the selection process of the dust collector, the most important is the relevant parameters. The dust collector has many technical parameters. The main parameters are static pressure, power, filtering area and treatment. Air volume and so on.
How to choose the dust collector of Guangdong dust collector manufacturer?
The processing air volume of the dust collector mainly refers to the volume of gas that the equipment can purify in a unit time. Its unit time is standard cubic meters per hour. During the selection process, the equipment can effectively select the dust collection according to its air volume design. Device manufacturer's equipment.
In the process of selecting the air volume of the dust collector, the air volume should not be too large, otherwise the floor space and investment of the equipment need to be increased. When the equipment is operating, it needs to select a reasonable air volume for processing, and it needs to effectively according to its process conditions and experience To decide.
What should I pay attention to when the dust collector is running?
During the operation of the dust collector, under normal circumstances, it cannot be used with more than its specified air volume, otherwise it will directly cause the filter bag to be easily blocked, so the service life of the equipment will shorten its pressure loss. Will rise sharply.
Dust collector features of Yuchen Guangdong Dust Collector Manufacturer:
、采用新型的滤袋材质，工作温度高，布袋强度高，使用寿命长。 1. Use new filter bag material, high working temperature, high bag strength and long service life. During work, the dust cleaned from the bag of the dust collector directly falls into the ash collection drawer for easy cleaning.
2. The filtration method is used to block the particles in the dust-containing gas on the bag fabric, thereby purifying the gas.
99% 以上，能除去 1 微米左右的颗粒。 Compared with general dust collectors, the dust removal efficiency can be stabilized at more than 99% , and particles about 1 micron can be removed . The dust collector has the advantages of simple structure, low investment cost, simple and reliable operation, and low technical requirements for management and maintenance.
用高压（ 0.4MPa-7MPa) 脉冲气流反吹来清除除尘器过摅布袋上的积灰。 3. Use high pressure ( 0.4MPa-7MPa) pulse airflow to blow back to remove the dust on the dust bag.
The duration and interval of the blowing operation can be changed by adjusting the pulse period and pulse width to keep the filter bag in a good filtering state. Therefore, the filtering speed of the pulse bag type dust collector is high and the dust removal effect is relatively stable. At the same time, the filter bag has no mechanical movement during dust removal by compressed air back blowing, and the filter bag has a long service life.
More recommendations: characteristics and classification of dust removal equipment
宇晨除尘设备厂家 ，我司为您提供更多的设计方案、价格、看现场等相关服务，欢迎来电！ For more product models, prices, and working principles of Guangdong dust collector manufacturers , please call 400-622-6298 Yuchen Dust Removal Equipment Manufacturer . !!