⎝⎛足球正网开户⎞⎠

Dongguan Yuchen Machinery Technology Co., Ltd. Industrial dust removal equipment manufacturers provide industrial dust extraction equipment, dust collector equipment, industrial dust collector equipment, grinding dust removal equipment, polishing dust removal equipment, workshop dust removal equipment, and provide a complete set of design solutions for workshop dust treatment plant dust treatment Quotation, see on-site service
Dongguan Yuchen Industrial Dedusting Equipment Manufacturer
Provide dust removal plan for grinding and polishing dust removal equipment workshop
Unified national service hotline:
0769-81256298 400-622-6298 0769-81256298

Introduction of stand-alone bag dust removal equipment


Stand-alone bag type dust removal equipment is a small, high-efficiency #place dust removal device. The basic structure of this series of units consists of fan, filter and dust collector. All components are installed in a vertical frame with a steel plate shell. Beautiful appearance, scientific structure, reliable operation, easy to use, the following is the introduction of some single bag dust removal equipment .


The stand-alone bag dust removal equipment is introduced as follows:


The products are widely used in dust removal in industries such as casting, ceramics, glass, refractory materials, cement building materials, grinding wheel manufacturing, chemical industry, machining, etc. This product has a good dust removal effect on high-density metal chips, lathes, grinders, milling machines, grinders, polishing machines and other foundry sands; and medium density such as cement, ceramic powder, gypsum powder, carbon powder, pigment, bakelite powder, plastic powder Dust. And low density non-fibrous dust. Unit efficiency is greater than ninety-nine. 5%.


This product integrates fans, mufflers, dust collectors, ash storage buckets, ash unloaders, electrical appliances, and switches. Therefore, its small size does not require additional design of fans, air ducts and installation foundations, which greatly simplifies dust removal design and construction work. ..


Due to the role of the muffler, the noise is about 75db, and the noise is low, so it can be used indoors. Using bag type dust removal method, the dust removal efficiency can reach 99.8%, and the dust removal efficiency is high. Due to the special impeller of the fan, the amount of wind generated by the fan is large and the wind pressure is high. Under the maximum suction air volume, the fan pressure can reach 2500 pa and the working pressure can reach 500 pa. 580 pa. The ash catching effect is good.


This machine is made of thin steel plate, so it is very light weight. At the same time, rubber wheels can be installed at the bottom according to needs, which is convenient and flexible to move. The bag-type ashing mechanism adopts manual and electric vibration, and the structure is simple and reliable.


单机袋式除尘设备介绍


Introduction of single bag type dust removal equipment


将电源插头插入380 v、50hz电源,按下开关启动,注意转动方向. 方向箭头下方有一个橡胶塞,可以清楚地看到风扇叶轮的旋转方向. 如果风扇叶轮反转,电源相线将切换。 (1) Insert the power plug into a 380v, 50hz power supply, press the switch to start, pay attention to the direction of rotation. There is a rubber plug under the direction arrow, you can clearly see the rotation direction of the fan impeller. If the fan impeller is reversed, the power phase line Will switch. Note: If the fan impeller is reversed, the suction effect will be very poor.


(2) According to the processing technology of the machine tool, make a dust suction port, and connect the plastic spring hose with the dust suction port. The production of ash suction port should pay attention to the following principles: the area should not be too large, as close as possible to the ash discharge point, the closer the ash suction port, the better. The position of the air outlet is consistent with the direction of dust emission. The suction port can be closed as much as possible. Handle operations as easily as possible.


(3) Regularly stop the rotation of the fan (depending on the amount of dust sucked in, the time interval for suction is short), lift the moving dust, shake the handle, and bounce the dust accumulated on the bag to ensure the reliable operation of the fan


(4) Pull out the ash hopper (based on the amount of dust) every few days to remove the dust accumulated in the ash hopper.


(5) When in use, tighten the hopper inspection door to prevent motor leakage and overload.


Related recommendation: stand-alone dust collector


的单机袋式除尘设备介绍,更多介绍欢迎致电400-622-6298,为您提供更多的单机袋式除尘设备介绍! The above is the introduction of stand-alone bag dust removal equipment from some Yuchen dust removal equipment manufacturers . For more introduction, please call 400-622-6298 to provide you with more introduction of stand-alone bag dust removal equipment!

Dust collector equipment
Dust collector equipment
Industrial dust removal equipment manufacturers_Dongguan Yuchen Machinery Technology Co., Ltd. Copyrightn 2013 Sitemap visits: [ Baidu Statistics ]
Manufacturer of dust removal equipment_Tel : 0769-8125 6298/81256299 Contact person: Miss Xie / 13922901739 Sales person of industrial dust removal equipment: Mr. Wang / 13600259680
粤ICP备13067491号-2 * Our company is a dust removal equipment manufacturer integrating scientific research, development and manufacturing. * Technical Support: Dongguan Website Construction [ Background Management ] [ Email Login ] Guangdong ICP No. 13067491-2
必赢真人娱乐 七乐彩 星力捕鱼 欢乐拼三张