|Industrial dust treatment equipment series|
|Welding fume exhaust gas treatment series|
|Grinding polishing dust removal equipment|
|Stand-alone dust collector|
|Spiral duct and accessories series|
Bag dust removal equipment is one of the workshop dust removal equipment, which has many advantages. Bag dust removal equipment is widely used in flue gas treatment and dust removal in ironworks, steelmaking plants, ferroalloy plants, refractory plants, foundries, power plants, etc. It is very Popular. However, the bag dust removal equipment is a machine after all. During the operation of the dust removal equipment, bag damage and separation often occur. Dust-containing gas directly enters the clean air from the bag damage or separation port, so that a large amount of alumina can be directly followed by the bag without filtering. The net gas is discharged into the atmosphere, which increases the alumina in the flue gas emitted from the chimney. The bag dust removal equipment will inevitably fail during use. Let us briefly introduce the common problems of bag dust removal equipment .
Common problems of bag dust removal equipment are as follows:
Some people report that after using bag dust removal equipment for a long time, the overall resistance will increase. I don't know what the reason is. In fact, this problem may be caused by the long interval of the blowing time of the bag dust removal equipment. Since different industrial enterprises use different types of bag dust removal equipment, the parameter settings are not different. The air supply interval of the bag type dust removal equipment is long, on the one hand, it can prolong the service life of the filter bag, and on the other hand, it can increase the resistance. The setting of injection parameters should be set according to the actual application.
Common faults of bag dust removal equipment, leakage between the front and rear flues The dust-containing gas and cleaning gas flowing in the front and rear flues of the dust removal equipment are the dust-containing gas and the cleaning gas before and after the dust removal, respectively. After the front and rear flue partitions are abraded by alumina, the strength of the steel plate is reduced, and the welded parts are often worn out. At the same time, due to the vibration of the front and back flue airflow, the steel plates between the front and rear flues are often torn, and the welded parts are welded by vibration. The flues collude with each other, forming a short circuit between the clean gas and the dust-containing gas. The dust-containing gas directly enters the rear flue without passing through the bag type dust removal equipment, which increases the concentration of alumina in the clean gas, reduces the dust removal efficiency, and increases the raw materials. Flying loss.
Related recommendation: Working principle of bag filter
的布袋除尘设备的常见故障问题，更多布袋除尘设备型号、价格、工作等相关问题欢迎致电400-622-6298 ！ The above are some common problems of bag dust removal equipment of Yuchen dust removal equipment manufacturers . For more bag dust removal equipment model, price, work and other related questions, please call 400-622-6298 !