|Industrial dust treatment equipment series|
|Welding fume exhaust gas treatment series|
|Grinding polishing dust removal equipment|
|Stand-alone dust collector|
|Spiral duct and accessories series|
十几种除尘器设备介绍 Dust collector equipment Dust removal system generally refers to a mechanical exhaust system consisting of local exhaust hoods, ducts, fans, dust collectors, etc. It is used to capture, transport and purify dusty air. Introduction to more than a dozen types of dust collector equipment
A dozen types of dust collector equipment are introduced as follows:
Brief introduction of various types of vacuum cleaners, dust collectors are also called dust collectors, used to collect and separate dust particles suspended in air or gas. Due to the sudden drop in the velocity of dust-laden air entering a large space, the dust particles and the Gas separation, we call it gravity precipitator.
Dry type dust collector: A dust collector that does not use water or other liquids to collect and separate dust particles in air or gas.
Inertial dust collector: Force the airflow direction to change through various baffles, and use the inertia of dust particles to collide with the baffle to separate and capture dust particles.
Cyclone dust collector. The dust-containing airflow enters the cylinder in a tangential direction for spiral rotation. The dust collector separates and captures dust particles under the action of centrifugal force.
Multi-tube cyclone dust collector: A plurality of cyclone separators with smaller diameters are assembled in parallel to form a whole dust collector with a common inlet and outlet and a dust collector.
The electrostatic precipitator consists of a corona electrode, a dust collecting electrode, etc. Under the action of a high-voltage electric field, particles in the dust-containing air current are charged and adsorbed on the dust collecting electrode.
Wet dust collector uses the contact and impact between dust-containing gas and liquid droplets or liquid films. It is a device that separates dust particles from airflow.
Water film dust collector, the dust-containing gas enters from the inlet of the lower part of the cylinder along the tangential direction, and then rotates upward. Under the action of centrifugal force, the dust particles are thrown to the inner wall of the cylinder, and at the same time, the water flowing down the inner wall of the cylinder The membrane adheres to capture and is discharged from the lower cone. A horizontal cyclone water film dust collector is composed of horizontal inner and outer rotating cylinders. The rotating dust-containing air stream hits the water surface, forming a flowing water film inside the outer rotating cylinder. A large amount of water mist is generated, which makes the dust particles collide with the water droplets and is captured by the water film under the effect of centrifugal force.
Introduction of more than ten kinds of dust collector equipment: Foam dust collector, the dust-containing airflow passes through the foam layer on the sieve plate from bottom to top at a certain flow rate to be purified.
Pulse type dust collector is a wet type dust collector, in which the dust-containing airflow enters the cylinder and turns to impact the liquid surface. Some large dust particles directly settle in the mud hopper, and then the dust-containing airflow passes through the s-shaped channel at high speed, arousing a large amount of water. Fog and water droplets allow fine dust and water mist to fully mix and contact, thereby being trapped.
Venturi tube dust collector, a dust collector composed of a venturi tube and a droplet separator. When the dust-containing gas passes through the throat at high speed, the droplets sprayed from the nozzle will further atomize and continuously collide with the dust particles. In addition, it will penetrate the air film around the dust particles, making the fine dust particles condensed into a particle size. Large dust-containing droplets enter the separator for separation and capture to purify dust-containing gas, also known as Venturi scrubber.
The sieve plate tower is a purification device with multiple sieve plates in the cylinder. The gas passes through the liquid layer on the sieve plate from bottom to top, and the gas bubbles to absorb harmful substances.
Packed tower. The cylinder is filled with ring, corrugated or other shapes of packing. The adsorbent is sprayed down from the top of the tower on the packing. The gas rises along the gap between the packing, and the harmful substances are absorbed by gas-liquid contact.
Air filter, a device that purifies dusty air by filtering the filter material. Self-winding filter, air filter with self-winding dust using roll filter material.
The vacuum cleaner is a device that cleans the dust-accumulating surface through a high-vacuum suction nozzle and performs purification treatment.
More than a dozen kinds of dust collector equipment introductionRelated introduction: What are the dust removal equipment
给大家带来的十几种除尘器设备介绍 The above is the introduction of more than a dozen types of dust collector equipment brought by Yuchen dust removal equipment manufacturers .