|Industrial dust treatment equipment series|
|Welding fume exhaust gas treatment series|
|Grinding polishing dust removal equipment|
|Stand-alone dust collector|
|Spiral duct and accessories series|
哪种除尘设备更适合抛丸机？ Speaking of shot blasting machines, people will think that the dust generated during the polishing process of shot blasting machines is metal dust. It is not difficult to deal with this kind of dust, and it is not easy or easy. How to equip the shot blasting machine with a suitable dust collector ? Which dust removal equipment is more suitable for shot blasting machine?
Because the shot blasting dust concentration is not small, all are metal dust, the shot blasting machine is a rectangular device, and dust will appear on the left and right ends of the length section. According to the principle, there is no problem using the two air inlets of one device. However, because of the shot blasting machine The principle and practical application of the dust collector are often not in place, resulting in insufficient air volume or insufficient air pressure.
The manufacturers who have been in contact with many shot blasting machines do not know the wind pressure, so there is no place when manufacturing equipment. This kind of dust can be cleaned by using the two suction ports of the vacuum cleaner. The calculation of wind pressure and air volume is only Need to use two small devices, one end is also possible, mainly depends on the choice of air volume and wind pressure.
哪种除尘设备更适合抛丸机？ So why do you choose a cartridge filter? Which type of dust removal equipment is more suitable for shot blasting machine?
Because the shot blasting machine is usually placed in the factory building, the height of the factory building is generally 6-7 meters. If a bag type dust collector is used at a limited height, the filter cartridge dust collector is more suitable for selection. At the same time, the advantages of the filter cartridge dust collector also determine the filter Dust collectors must be used for this type of dust.
The working principle of the blasting machine dust removal equipment:
主风机的作用下，含尘气体从除尘器下部的进风口进入除尘器底部的气箱内进行含尘气体的预处理，然后从底部进入到上箱体的各除尘室内；粉尘吸附在滤筒的外表面上，过滤后的干净气体透过筒进入上箱体的净气腔并汇集至出风口排出。 Under the action of the main fan of the dust collector , the dust-containing gas enters the air box at the bottom of the dust collector from the air inlet at the lower part of the dust collector for pretreatment of the dust-containing gas, and then enters into the dust removal chambers of the upper box from the bottom; Adsorbed on the outer surface of the filter cartridge, the filtered clean gas passes through the cartridge and enters the clean air cavity of the upper box and is collected at the air outlet for discharge.
1400 ～ 1600Pa 范围内，当超过此限定范围，应由 PLC 脉冲自动控制器通过定阻或定时发出指令，进行三状态清灰。 As the filtering conditions continue, the dust accumulated on the outer surface of the filter cartridge will accumulate more and more, and the operating resistance of the equipment will increase accordingly. In order to ensure the normal operation of the system, the upper limit of the resistance of the dust collector should be maintained in the range of 1400 to 1600Pa In this case, when the limit is exceeded, the PLC pulse automatic controller should issue a command through fixed resistance or timing to perform three-state cleaning.
The dust removal process of the cartridge type dust collector is to first cut off the clean air outlet channel of a certain room, make the room in a static state of the air flow, and then perform compressed air pulse to blow back the dust. After natural settling, the clean air outlet channel of the chamber is opened, which not only completely cleans the ash, but also avoids secondary adsorption of dust generated by blowing ash, thus circulating the ash cleaning from room to room.
Which kind of dust removal equipment is more suitable for shot blasting machine? Related Products: Cartridge Dust Collector
为大家带来的 哪种除尘设备更适合抛丸机相关介绍，更多价格、工作原理等相关信息，欢迎致电400-622-6298！ The above is the introduction of which type of dust removal equipment from Yuchen Dust Removal Equipment Manufacturer is more suitable for shot blasting machine. More prices, working principles and other related information, please call 400-622-6298!