|Industrial dust treatment equipment series|
|Welding fume exhaust gas treatment series|
|Grinding polishing dust removal equipment|
|Stand-alone dust collector|
|Spiral duct and accessories series|
The quarry dust collector is a new type of dust removal equipment developed by our quarry dust collector equipment manufacturer . It is an efficient dust removal equipment, especially suitable for dust removal in stone grinding, screening, belt conveying, sand making machines and other processes.
The quarry precipitator produced by our company is also the main precipitator. No matter in appearance or in any aspect, it has its own unique side, because the quarry usually has large dust particles and very fine dry particles. Fine dust. When choosing a dust collector, you must consider not only collecting large particles of dust, but also collecting fine particles of dust. In response to this situation, quarries, bag filters have become the preferred solution.
Design of dust cover for quarry dust collector equipment manufacturer:
(1) Partial closed cover of the quarry dust collector. The partial closed cover is only closed, the dust discharge point, and the process equipment is exposed. It has the characteristics of small size, small footprint, less material consumption, convenient operation and maintenance, etc. The disadvantage is that it is not suitable for situations where the feed dust-laden airflow speed is high or the dust source is sudden. It is suitable for fixed dust generation points, small dust generation air velocity, continuous dust generation, and small instantaneous pressurization, such as belt conveyors, receiving points, grinders, receiving ports, etc.
(2) The overall airtight cover of the vacuum cleaner The overall airtight cover is to seal most of the dust discharge points and dust generating equipment, leaving only the transmission part of the equipment outside the cover. It has the characteristics of large volume and good sealing. The cover itself is basically an independent, whole, and it is easy to be tightened. The equipment can be inspected through the observation hole on the cover, and the maintenance of the transmission part of the equipment can be performed outside the cover. This sealing method is suitable for vibration equipment or equipment with a large air velocity of dust-laden air, such as paroxysmal dust and dust-producing equipment, such as vibrating screens, etc.
(3) The large-capacity closed cover of the pulse precipitator of the quarry is to close the dust point and dust generating equipment. It is characterized by the large volume inside the cover, which can buffer the dust-containing airflow, and use the circulating airflow in the cover to eliminate or reduce local positive pressure. .. The operation of the equipment can be checked through the observation hole on the cover, and the maintenance equipment can be performed on the cover. It is suitable for equipment or places with high dust emission, sudden dust emission and dust-laden airflow speed, and it is also suitable for frequent maintenance Advanced equipment of quarry dust collectors that are inconvenient to use an integrated enclosure
Six characteristics of quarry dust collector equipment manufacturer:
2. The equipment has a small volume and a small footprint, which can effectively save production space.
3. The dust removal equipment is integrated with the fan, which can be flexibly moved as required.
4. Extremely simple structure and easy maintenance.
5. Small one-time investment and stable performance.
6. Suitable for sub-micron and above dust, with high purification efficiency, up to 99.9%.
The quarry dust collector equipment manufacturer quarry dust collector works in the following principle: its working principle is that the dust-containing gas enters the upper space of the filter room tangentially. Under the action of centrifugal force, large particles and condensed dust particles are along the wall of the cylinder. Rotate and fall into the ash hopper. Small particles of dust are scattered in the space between the filter chambers and blocked by the filter bags. The purified air passes through the bag walls, passes through the flower tray, and the filter bag guides are collected in the cleaning room. Suction by fan and exhaust ... With the continuous improvement of the filtering conditions, the dust remaining on the surface of the filter bag gradually increases, and the resistance of the air flow is gradually increased. When the set resistance limit is reached, the automatic control device turns on the anti-blow cleaning machine for cleaning.
After-sales service and quality assurance of quarry dust collector equipment manufacturers
1. After the equipment arrives, the designated warehouse or construction site will be dispatched with competent and experienced personnel to the site for acceptance and handover work. The buyer is responsible for organizing relevant units and personnel to jointly carry out the inventory and appearance inspection of the equipment quantity, and handle the acceptance procedures.
2. In the process of installation, commissioning and testing, our company's technical service personnel will conduct technical explanations according to the main requirements of the company, explain and demonstrate the procedures and methods to be performed.
3. We implement the principle of 24-hour dynamic response to the after-sales service of products, accept user assignments at any time, and rush to the scene to solve even small problems to ensure that users use each device normally.
4. During the equipment acceptance process, during the installation and commissioning process, if any equipment provided by us is found to be inconsistent or due to our mistakes in the installation process, any damage to the equipment will be borne by us, and the required Equipment and components.
5. When the buyer requests additional, equipment and parts, we will help resolve the issue as soon as possible.
6. After the equipment contract takes effect, the equipment inspection outline (considered and confirmed by both parties) will be provided as the basic basis for equipment inspection. During the equipment manufacturing, the buyer can request to visit our company and the factory for equipment supervision at any time. We will provide support work together.
7. The equipment quality guarantee period starts after the performance test is qualified, and is implemented according to the relevant requirements of the purchaser. Equipment handover acceptance does not relieve us of our warranty liability during the warranty period of the equipment.
的采石场除尘器设备生产厂家相关推荐，更多采石场除尘器设备生产厂家欢迎致电400-622-6298，我司采石场除尘器设备生产厂家为您提供更多的相关服务！ The above are the relevant recommendations of quarry dust collector equipment manufacturers from Yuchen Dust Collector Equipment Manufacturer . More quarry dust collector equipment manufacturers are welcome to call 400-622-6298. Our quarry dust collector equipment manufacturer provides More related services!