|Industrial dust treatment equipment series|
|Welding fume exhaust gas treatment series|
|Grinding polishing dust removal equipment|
|Stand-alone dust collector|
|Spiral duct and accessories series|
Attentions during the installation and operation of bag dust collectors. Under the conditions of dust and gas properties, different bag dust collectors will still choose different filtering wind speeds. Such as ordinary industrial dust. Some bag filters have a filtration speed of 1m / min, and some are 3m / min, which can reach 5.8m / min. There are many reasons for this difference, the most important of which is the different ash removal methods.
When the bag type dust collector is working, the dust accumulation on the bag type dust collector is constantly increasing, and the dust collector is removed to a certain extent, ensuring the normal operation of the dust collector. However, no matter what kind of bag dust collector, Possibility to completely remove the dust from the filter bag. Only a part of it can be removed. Some vacuum cleaners are very strong (e.g. pulse bag filter) and dust drops more. Bag filter is somewhat weak (e.g. g. Negative pressure back blowing bag type dust collector), less dust.
Precautions during the installation and operation of the bag filter. During operation, the dust layer on the filter bag of the large ash dust collector is thin, the resistance is low, and more gas can be passed. On the contrary, the dust layer on the filter bag is thicker, and the resistance is higher. Larger, can pass only less gas.
Due to the large relationship between the filtration speed and the dust resistance, and the filter of the dust removal layer (more than 60% of the total resistance), the filtration between most bag dust collectors causes a large difference in wind speed.
It is important to understand the precautions during commissioning of the bag filter. In order to let more users know the operating instructions of the bag type dust collector produced by the filter, the points that need to pay attention to when the bag type dust collector is used are introduced in detail. .
Pay attention to the speed and direction of the fan. When dealing with air volume and test points, you must check whether the data such as pressure and temperature meet the design requirements. If not, adjust in time and the consistency can be put into use. When installing the bag filter, check whether the bag filter is worn.
After the chimney is installed and operated, the chimney emissions should be visually inspected to obtain dust removal information. After running or running for a period of time, pay attention to whether the bag filter has dew condensation in the bag room, whether the ash discharge is unblocked, and whether the ash accumulation affects the operation of the host.
Properly adjust the ash time and circulation. The operation of oil fume purification has a great impact on the operation of the machine. Too long, it is easy to remove dust. Too short, it is easy to restore filtration and increase resistance. Damage should be paid special attention.
Precautions during the installation and operation of the bag filter. After commissioning, you should pay attention to many unexpected situations. For all these cases, the operator should keep records for future query and timely adjustment to ensure the product. Quality and safety.
Related recommendation: Working principle of bag filter
提供的袋式除尘器安装运行时注意事项， 我司提供车间粉尘、废气等除尘工程，从最初的规划到整套除尘系统的调试运行，欢迎来电 400-622-6298 ，欢迎来电咨询！ The above are the precautions for the installation and operation of bag dust collectors provided by Yuchen dust removal equipment manufacturers . Our company provides workshop dust, exhaust gas and other dust removal projects, from the initial planning to the commissioning and operation of the entire dust removal system . Welcome to inquire!