|Industrial dust treatment equipment series|
|Welding fume exhaust gas treatment series|
|Grinding polishing dust removal equipment|
|Stand-alone dust collector|
|Spiral duct and accessories series|
Note on the design of the flower plate of the bag filter. The template of the dust collector is also called perforated plate. It refers to the steel partition with the same size filter bag holes. In the flower plate design, the distance between the filter bag holes is mainly set. It is related to factors such as filter bag diameter, filter bag length, dust properties, and filtration speed. For example, the distance between the holes is too close, the bottom of the filter bag collides with each other and wears, and some of the bottom of the filter bag breaks within a few months of operation. Insufficient dust removal.
According to our company's engineers, the design of the filter bag spacing should be based on the length of the filter bag and the rising speed of the air flow. At least greater than 2/5 of the filter bag diameter (not less than 40 mm). Only in this way, the design can be reasonable and reliable. Bag dust removal Flower board design considerations
The average arrangement of flower plate holes is suitable for small and medium-sized pulse dust collectors. The invention is suitable for large and medium-sized pulse dust collectors.
Note on the design of the flower bag dust collector:
(1) The flower plate must not only bear the negative pressure of the system, but also the weight of the filter bag, dust layer, and bag cage. If the flower plate is deformed, it may affect the weight and flatness of the filter bag and the sealing effect of the bag mouth. Design It should be strengthened at the lower part of the flower plate.
(2) The color plate of the vacuum cleaner should be smooth and clean, without defects such as skew, unevenness, etc., and its flatness deviation must not be greater than 2 / 1000. of the length of the color plate. The periphery of the flower plate hole requires lubrication without burrs. The tolerance of the flower plate hole of the filter bag fixed by the elastic expansion ring is +/- 0. 3 mm. After processing the panel aperture, the deviation between the device position and the theoretical position should be less than 1.5 mm. The flatness deviation should not be greater than 2/1000 of the flower plate length.
Related recommendations: How to choose the right bag filter?
提供的布袋除尘器花板设计注意事项， 我司提供车间粉尘、废气等除尘工程，从最初的规划到整套除尘系统的调试运行，欢迎来电 400-622-6298 ，欢迎来电咨询！ The above are the precautions for the design of the bag filter provided by Yuchen dust removal equipment manufacturers . Our company provides workshop dust, exhaust gas and other dust removal projects. From the initial planning to the commissioning and operation of the entire dust removal system, please call 400-622-6298 , welcome Call us!