|Industrial dust treatment equipment series|
|Welding fume exhaust gas treatment series|
|Grinding polishing dust removal equipment|
|Stand-alone dust collector|
|Spiral duct and accessories series|
This section introduces the installation method and precautions of dust bag for bag filter.
Dust removal bag device steps:
1. While holding one end of the open tooth of the dust bag, fold the other part of the dust bag up at the same time, push the folded dust bag part into the sleeve, and pass through the flower plate. After opening the folded part of the dust bag under the flower plate, loosen the top of the dust bag to install the grooved buffer spring coil on the sleeve of the flower plate.
2. Let the weight of the dust bag slowly fix the position, and let the metal ring pull the sleeve from the top of the dust bag. The sleeve is arranged in the hole of the flower plate.
3. Hold the trough buffer spring coil with both hands (no need to pull up the dust bag), and press the spring coil inward with both hands to form a "c" shape. While maintaining the "c" shape of the spring coil, place the raised side of the grooved spring coil on the edge of the hole in the flower plate. Hold one side of the raised "c" -shaped spring coil with one hand, and fix the raised "c" shape to the edge of the faceplate with the other hand.
4. Use one hand to fix the position of one side of the raised “c” spring coil, and gradually stretch the other hand to open the other side of the spring coil. The groove of the spring coil fits into the hole of the flower plate.
5. If you can't hear the "snap" sound when the spring coil is fully expanded, push the spring coil towards the inner edge of the hole of the flower plate with the female finger of one hand, so that the groove of the spring coil fits into the inner edge of the hole of the flower plate. .
6. Under normal circumstances, you should hear a "snap". Otherwise, the spring coil will bend into a "c" shape again from another position. Lift the spring coil over the faceplate and repeat the above steps.
注意事项: This section introduces the installation methods and precautions of dust bag for bag filter :
1. When installing, pay attention to putting the frame into the dust bag slowly. If the resistance is very large, you must pull it back and then put it down quietly. If the resistance is still very large, you must repeat the operation until it is easy to drop .. Can prevent the dust bag from being scratched by the corner of the frame! It is forbidden to make the frame hit the dust bag.
2. Make sure that the surface of the dust bag liner and the hole of the flower plate are well sealed.
3. The dust bag frame locator or fastener of the equipment should ensure that the dust bag / dust bag frame gasket works under appropriate pressure.
提供的 介绍布袋除尘器防尘袋的安装方法，更多相关推荐： 如何选择合适的袋式除尘器? The above is the introduction of the installation method of bag dust collector dust bag provided by Yuchen dust removal equipment manufacturer . More related recommendations: How to choose the right bag dust collector?