|Industrial dust treatment equipment series|
|Welding fume exhaust gas treatment series|
|Grinding polishing dust removal equipment|
|Stand-alone dust collector|
|Spiral duct and accessories series|
Things to do before using a bag filter . The bag filter works normally, which directly affects whether it can be used for conveying pipes. Otherwise, the bag filter may fail quickly. Be careful when debugging the equipment. When commissioning a new bag filter, special attention should be paid to the following points: Install a filter bag. If the bag comes off, drains, wears, etc., the parameters can be determined according to the chimney discharge after use.
Pay attention to whether there is dew condensation in the bag room and whether the ash system is unblocked. When preventing blockage and corrosion, severe ash will affect the production of the host. This work is an important factor in dust removal and operating conditions. Handling the air volume at each test point , Pressure, and temperature to match the design: 5 .. Direction of rotation, speed, vibration, and temperature of the fan.
If the dust removal time is too long, the filter bag will leak and damage. The time distance between the two clear gray cycles is called the gray cycle. The general cleaning cycle should be extended for a period of time so that the vacuum cleaner can operate on an economical basis .. Therefore It is necessary to carefully study the nature and concentration of dust.
According to different cleaning methods, the cleaning cycle and time were determined, and the cleaning parameters in the test were adjusted. Sudden changes in the gas temperature of the dust removal component will cause the fan shaft to deform, resulting in imbalance and vibration during operation. It stops working, the temperature drops, and then it vibrates again.
提供的使用袋式除尘器前要做的事情 ，更多相关推荐： 如何选择合适的袋式除尘器? The above are the things to do before using the bag dust collector provided by Yuchen dust removal equipment manufacturers . More related recommendations: How to choose the right bag dust collector?