|Industrial dust treatment equipment series|
|Welding fume exhaust gas treatment series|
|Grinding polishing dust removal equipment|
|Stand-alone dust collector|
|Spiral duct and accessories series|
Precautions for use of stand-alone pulse bag type dust collector . Single pulse bag type dust collector must be maintained during use to prolong its service life. How to maintain it? The filter of bag type dust collector must regularly check the wear of parts. Once the parts are found worn and there are signs of damage, they must be repaired in time. It cannot be repaired, and the new filter must be replaced in time. When using, the bag of the dust collector must be cleaned regularly according to the actual situation ..
Generally, after 4 months of continuous use, the vacuum cleaner must be cleaned once. When cleaning or changing the bag, loosen the four solid screws of the filter element to remove the bag.
To reinstall the bag, you must pay attention to the seal of the flow filter element and the filter fan component. At the same time, it is also important to pay attention to the filter element installed on each bag must match the product. The original level.
After using the bag filter for 6 months, it is necessary to filter the grease in the motor parts and fuel and shake the dust removal motor cover. The eccentric sleeve bearing in the motor needs to check the use of the rubber sealing film. At the same time, the degree of damage and severe wear must be replaced .. To maintain, maintain and keep the unit clean and beautiful to ensure the normal operation of the dust collector.