|Industrial dust treatment equipment series|
|Welding fume exhaust gas treatment series|
|Grinding polishing dust removal equipment|
|Stand-alone dust collector|
|Spiral duct and accessories series|
Commissioning and maintenance of dust removal equipment
主体:设备安装完毕后，清除箱体、灰仓等部件内的杂物，检查各传动部件，注入润滑油(脂)，向减速箱注入HJ - 30或HJ - 20油。 Dust removal equipment main body: After the installation of the equipment is completed, remove the sundries in the box, ash bin and other components, check each transmission part, fill in the lubricating oil (grease), and fill the gearbox with HJ-30 or HJ-20 oil.
(1) Connect the compressed air, and check all the joints of the compressed air pipe, the shut-off valve, the pilot air filter, the pressure regulator, and the oil mist filter.
(2) Start the ash conveying motor and check whether it works normally.
(3) Start the main fan
( 4 )用皮托管同时测量灰斗各入口管的动压值. 如果读数不同，用手动蝶形调整使其相等，以确保每个过滤室的负荷相等. 调整后，锁定手动蝴蝶。 Debugging and maintenance of the dust removal equipment (4) Simultaneously measure the dynamic pressure value of each inlet pipe of the ash pit with a pitot tube. If the readings are different, use manual butterfly adjustment to make them equal to ensure that the load of each filter room is equal. After adjustment, Lock the manual butterfly.
(5) Drive the manual blowback butterfly valve to the required blowback position.
(6) When the bag-type dust collector starts to run the dust, do not start the anti-blow dust removal device immediately. The dust should slowly accumulate on the inner surface of the bag.
2. 电子控制部分: ( 1 )电控清灰装置: a. 将单针指示器报警器的上限报警信号线与电子控制仪表的输入端连接。 Debugging and maintenance of dust removal equipment 2. Electronic control part: (1) Electric control dust removal device: a. Connect the upper limit alarm signal line of the single needle indicator alarm to the input end of the electronic control instrument. b. Connect the normally open contact of the three-way valve travel switch with the indicator light. At the same time, connect the differential pressure transmitter, indicating the alarm and the power line of the electronic control instrument. (2) Electrically controlled dust removal operation.
印刷包装、油墨、胶粘剂、有机溶剂、有色金属熔炼加工、橡胶生产、制革、化工、陶瓷烧制、铸造、丝网加工、轧钢、耐火材料、碳素生产、石灰窑、砖瓦窑、水泥粉磨站、废塑料加工、小炼油、玻璃制造、纺织印染、合成纤维制造、表面涂装、家具、制鞋、汽修、食品加工、石材加工、废品回收加工、人造板制造、电子元件制造、酸洗磷化等小型制造加工企业；涉及使用涂料、油漆等小型企业等行业的烟气、粉尘处理工程。 The above is the debugging and maintenance of the dust removal equipment provided by Yuchen dust removal equipment manufacturers. The dust removal equipment is used for printing and packaging, inks, adhesives, organic solvents, non-ferrous metal melting processing, rubber production, tanning, chemical, ceramic firing, casting, wire Wire mesh processing, steel rolling, refractory materials, carbon production, lime kiln, brick kiln, cement grinding station, waste plastic processing, small oil refining, glass manufacturing, textile printing and dyeing, synthetic fiber manufacturing, surface coating, furniture, shoe making, Small manufacturing and processing enterprises such as auto repair, food processing, stone processing, waste recycling processing, wood-based panel manufacturing, electronic component manufacturing, pickling and phosphating; smoke and dust treatment projects involving the use of coatings, paints and other small enterprises.
Related recommendations: Several models and uses of dust collector equipment
工业吸尘、工业除尘、焊烟净化、油雾净化、大型布袋除尘、联机系统、欢迎致电400-622-6298联系宇晨 除尘设备厂家 ！ More industrial vacuuming, industrial dust removal, welding smoke purification, oil mist purification, large bag dust removal, online system, please call 400-622-6298 to contact Yuchen dust removal equipment manufacturers !