|Industrial dust treatment equipment series|
|Welding fume exhaust gas treatment series|
|Grinding polishing dust removal equipment|
|Stand-alone dust collector|
|Spiral duct and accessories series|
布袋除尘器厂家 布袋除尘器特点如下： The characteristics of Qingyuan bag filter manufacturers bag filter are as follows:
清远 布袋除尘器厂家 1.Qingyuan bag filter manufacturers 布袋除尘器 采用了停腔停气的脉冲喷吹清灰技术，克服了传统脉冲除尘器和反腔喷吹除尘器的缺点，具有较强的清灰能力和除尘效率高、排放浓度低、漏风率小、能耗少、钢材用量少、占地面积小、运行稳定可靠、经济效益好。 The bag filter adopts the pulse injection ash cleaning technology that stops the cavity and stops the air. It overcomes the shortcomings of the traditional pulse dust collector and the anti-cavity injection dust collector. It has a strong ash cleaning ability, high dust removal efficiency, low emission concentration, The air leakage rate is small, the energy consumption is small, the amount of steel is small, the area is small, the operation is stable and reliable, and the economic benefits are good.
清远 布袋除尘器厂家 布袋除尘器 2.Qingyuan Bag Dust Collector Manufacturer Bag Dust Collector Due to the use of pulse-by-chamber closing of ash, it can achieve the purpose of complete dust removal in one injection, extending the dust removal cycle, reducing the energy consumption of dust removal, and increasing the air pressure. Consumption can be greatly reduced.
3. Without stopping the system fan, maintenance and bag replacement can be performed. Under normal operating conditions, the system can be divided into multiple chambers. The filter bag mouth uses an elastic expansion ring, which has good sealing performance and is firm and reliable. 布袋除尘器 由灰斗、上箱体、中箱体、下箱体等部分组成，上、中、下箱体为隔室结构. The filter bag keel is polygonal, which reduces the friction between the filter bag and the keel, prolongs the service life of the filter bag, and facilitates the removal of the filter bag. The bag filter is composed of a ash bucket, an upper box, a middle box, a lower box, etc. Partially composed, the upper, middle and lower boxes are compartmentalized.
布袋除尘器厂家 布袋除尘器工作原理： Working principle of bag dust collector of Qingyuan bag dust collector:
During work, the dust-containing gas enters the ash hopper from the air inlet pipe, and the coarse dust particles directly fall into the bottom of the ash hopper. The fine dust particles enter the middle and lower boxes with the airflow turning up, and the dust accumulates on the outer surface of the filter bag. The gas enters the upper box to the net collector-exhaust duct, and is discharged to the atmosphere by the exhaust fan. The dust removal process is to first cut off the clean air outlet of the chamber, so that the chamber bag is in a state without air flow. Then open The pulse valve uses compressed air for pulse blowing and dust cleaning. The closing time is sufficient to ensure that the dust peeled from the filter bag after the blowing is settled to the ash hopper, which prevents the dust from separating from the surface of the filter bag and attaching to the adjacent filter with the airflow The phenomenon of the bag surface makes the filter bag thoroughly cleaned, and the exhaust valve, pulse valve, ash discharge valve, etc. are fully automatically controlled by the programmable controller.
清远布袋除尘器厂家布袋除尘器的相关推荐，更多车间除尘方案、报价等相关服务，欢迎致电清远除尘设备厂家 400-622-6298，我司为您提供更多的服务！ The above are the relevant recommendations of Yuchen Qingyuan Bag Dust Collector manufacturers , more workshop dust removal programs, quotations and other related services. Welcome to call Qingyuan Dust Removal Equipment Manufacturer 400-622-6298. Our company will provide you with more services!