|Industrial dust treatment equipment series|
|Welding fume exhaust gas treatment series|
|Grinding polishing dust removal equipment|
|Stand-alone dust collector|
|Spiral duct and accessories series|
There are several factors in choosing a new boiler desulfurization and dust collector . With the advancement of technology, the application of new boiler dust collectors is becoming more and more diverse, and their functions and parameters are also different. Many people make a lot of mistakes when choosing a product. Due to the lack of relevant knowledge, how to purchase. Remind everyone that when buying new boiler desulfurization and dust removal equipment, you should determine what is needed from the following aspects. Several factors for choosing new boiler desulfurization and dust removal equipment are as follows:
The amount of gas that can be purified by the dust removal equipment per unit time. This is a prerequisite for determining the power and capacity of the dust removal equipment. When selecting the equipment, the power should be higher than the normal power to avoid unnecessary troubles. The temperature is determined by the high temperature of the filter and the gas The dew point temperature determines: In daily work, when the temperature is lower than the dew point, the temperature should be increased, and when it is higher, the temperature should be lowered.
From the machine cycle, choose whether the machine works for 24 hours according to the needs. The speed of the filtered gas passing through the filter material is a very important point in the selection of desulfurization and dust collector. Decide whether to buy explosion-proof industrial dust collector from the mechanical operating environment.
The dust collector has a large amount of air and purification air, and the purification effect is good .. Use temperature. The temperature of the dust collector is high, and the dust removal efficiency is not affected by temperature changes. The dust concentration at the entrance. The dust removal equipment is installed at the entrance to reduce the dust concentration. The dust concentration at the outlet. The dust concentration at the outlet should be reduced to meet the environmental requirements. Pressure loss. Dust removal pressure loss is small and resistance is small. Operating pressure. Stress tolerance during operation is good. Filtration speed. Filtration speed should properly maintain work continuity.
提供的选择新型锅炉脱硫除尘器的几个因素 ！ The above are several factors provided by Yuchen dust removal equipment manufacturers to choose a new boiler desulfurization dust collector ! For more models of new boiler desulfurization and dust collectors, please call 400-622-6298. Our company will provide you with more information!