|Industrial dust treatment equipment series|
|Welding fume exhaust gas treatment series|
|Grinding polishing dust removal equipment|
|Stand-alone dust collector|
|Spiral duct and accessories series|
How to prevent the explosion of dust removal equipment:
In bag dust collectors that handle waste gas from wood chip boilers, rice hull boilers, aluminum regeneration furnaces, and smelting furnaces, the burned dust in the furnace may enter the box with the air duct airflow, causing the dust accumulated on the filter cloth to catch fire and cause an accident In bag dust collectors that treat waste gas, such as wood chip boilers, rice hull boilers, aluminum regeneration furnaces, and smelting furnaces, the burned dust in the furnace will enter the cabinet with the air duct airflow, causing ash accumulation on the filter cloth, causing fire Accidents. To prevent Mars from entering the baghouse, the following measures should be taken:
How to prevent the explosion of dust removal equipment ① Install pre-dust collector and cooling pipe. The picture shows a cyclone or inert dust collector, as a front dust catcher to capture coarse dust and Mars. This is too good Mars is not easy to catch. In most cases, particulate dust will burn out before entering the vacuum cleaner .. There is a cooling pipe behind the pre-dust collector, and the flow rate in the pipe is controlled as low as possible. This is a relatively reliable technical measure, which can make the gas have a sufficient residence time in the pipe.
How to prevent the explosion of dust removal equipment ② Cool the spray tower. Direct water spray gas cooling method. In order to ensure the safety and fire prevention of the dust-containing gas in the bag filter, the amount of cooling water is controlled and supplied. Most of the burning dust can be cooled as soon as it comes into contact with small water droplets, but the water droplets are easily vaporized. Combustion of dust should provide the necessary space and dwell time. In special cases, spray towers, cooling pipes and pre-dusters are used in combination to prevent complete mixing of Mars.
How to prevent the explosion of dust removal equipment ③ It is a simple and feasible method to install a Mars capture device on the pipeline. And when Mars passes the trap, it can send out an electric signal to give an alarm. At the same time, stop operation or change the gas path.
提供的 如何预防除尘设备爆炸事故 ，更多相关推荐： 除尘器设备几种型号和用途 The above is how to prevent explosion accidents of dust removal equipment provided by Yuchen dust removal equipment manufacturers . More related recommendations: Several models and uses of dust removal equipment