What is the best dust removal equipment in the workshop? The main body of the dust removal equipment in the workshop is composed of a box, a bag room, an ash hopper, an air inlet and an air outlet, and is provided with columns, stairs, railings, compressed air pipe systems, and dust control mechanisms. (1) Box of workshop dust removal equipment: The box is mainly fixed with a dust removal frame, a dust bag and an airway component, and is made in a fully enclosed form. During dust removal, the compressed air pipe enters the box and no longer enters each dust bag. There is a manhole detection door on the top of the body. The installation and replacement of the dust removal frame and dust bag are carried out here. It is very convenient. The box is divided into several rooms according to different specifications, separated by steel plates, sealed to achieve offline dust removal. Each room All are equipped with a poppet valve to switch the dust bag airflow.
袋室:袋室位于箱体下部，主要用于容纳除尘框架和除尘袋，形成过滤空间. 含尘气体的净化主要在这里进行. 袋室和箱体一样，按照不同的规格分成若干个房间，并由隔板隔开，以防止除尘时房间之间的干扰，同时形成一定的沉淀空间. (2) Bag room for dust removal equipment in the workshop : The bag room is located at the lower part of the box, and is mainly used to receive the dust removal frame and the dust bag to form a filtering space. The purification of dust-containing gas is mainly performed here. The bag room is the same as the box, according to different The specifications are divided into several rooms and separated by partitions to prevent interference between the rooms during dust removal, while forming a certain precipitation space.
灰斗:灰斗设置在袋室下方. 除了储存收集的灰尘，它还用作下进气歧管. 含尘气体进入袋室时，首先进入灰斗. 由于灰斗体积大，气流速度降低. 此外，气流的方向也发生了变化，因此较粗的灰尘颗粒在这里被分离. 灰斗下部设有输灰设备，出口处还设有翻板阀等锁气设备，可连续排灰. (3) Ash hopper of the dust removal equipment of the workshop : The ash hopper is located below the bag chamber. In addition to storing the collected dust, it is also used as the lower intake manifold. When the dust-containing gas enters the bag chamber, it first enters the ash hopper. Larger, the airflow speed is reduced. In addition, the direction of the airflow has also changed, so coarse dust particles are separated here. There is a ash conveying device at the lower part of the ash hopper, and an airlock device such as a flap valve is provided at the exit. Continuous ash discharge.
进风口和出风口:根据吸尘器的结构形式，进风口和出风口分为两种. 一是进气口为圆柱形，直接焊接在灰斗侧板上. 出风口设置在箱体下部，通过升降阀板的孔与箱体内部连通. 二是进气口和出气口做成一体，设置在袋室的侧面，在箱体和灰斗之间，由倾斜的隔板分隔成两个相互密闭的部分，即进气口和出气口. 这种结构形式虽然体积较大，但气流分布均匀，灰斗内预除尘效果好，适用于气体粉尘浓度较高的场合. What is the best dust removal equipment in the workshop (4) Inlet and outlet of the dust removal equipment in the workshop : According to the structure of the vacuum cleaner, the air inlet and the air outlet are divided into two types. The first is that the air inlet is cylindrical and is directly welded to the side of the ash bucket. Upper. The air outlet is located in the lower part of the box, and communicates with the interior of the box through the hole of the lifting valve plate. The second is that the air inlet and the air outlet are integrated, and are set on the side of the bag room, between the box and the ash hopper The inclined partition is divided into two mutually closed parts, namely the air inlet and the air outlet. Although this structure is relatively large, the airflow is evenly distributed, and the pre-dust removal effect in the ash hopper is good. High occasion. What is the best recommendation for dust removal equipment in the workshop: Several models and uses of dust collector equipment
提供的车间除尘设备什么最好相关介绍。 The above is what is the best introduction of the workshop dust removal equipment provided by Yuchen dust removal equipment manufacturers . What is the best dust removal equipment in the workshop? Our company provides workshop dust, waste gas and other dust removal projects, from the initial planning to the commissioning and operation of the entire dust removal system. Welcome to call 400-622-6298, and welcome to inquire!