Characteristics of pulse dust collector: Characteristics of Pulse Dust Collector 1. The technology of pulse ash cleaning with shut-in and wind-stop is used to suppress the defects of traditional pulse precipitator and room-back spray precipitator. It has strong dust removal ability, high dust removal efficiency, low emission concentration, and low air leakage rate. Low energy consumption, low steel consumption, small gas accumulation, stable and reliable operation, and good economic benefits. Suitable for metallurgical, building materials, cement, machinery, chemical, power, light industry and other industries for dust-containing gas purification and material recovery. Characteristics of Pulse Dust Collector 2. As the ash cleaning adopts pulse spraying, the air in each chamber is closed, and a single blow can achieve the purpose of complete ash cleaning, thereby extending the ash cleaning cycle, reducing the ash cleaning energy consumption, and greatly reducing the compressed air. Consumption. At the same time, the fatigue of filter bags and pulse valves is correspondingly reduced, thereby doubling the service life of filter bags and valve plates. Characteristics of Pulse Dust Collector 3. During the maintenance and bag changing process, the system fan can run continuously. Under normal operating conditions, the system will be shut down in different rooms. The filter bag mouth adopts an elastic expansion ring, which has good sealing performance and firmness. The keel of the filter bag is polygonal, which reduces the friction between the filter bag and the keel, prolongs the service life of the filter bag, and facilitates the removal of the filter bag. Characteristics of pulse dust collector 4. Using the pull-up bag method. After removing the skeleton when changing bags, put the dirty bag into the ash bucket at the lower part of the box and remove it from the manhole, which improves the operating conditions of the bag change. Characteristics of Pulse Dust Collector 5. The box is designed to be airtight. Check the seal information of the inspection door. During the manufacturing process, kerosene is used to check for leaks, and the leak rate is very low.
Characteristics of pulse precipitator 6. The inlet and outlet ducts are compactly arranged and the airflow resistance is small.
Operation principle of pulse dust collector: Dust gas from the workshop enters the box of the dust removal equipment from the air inlet and is isolated by the filter bag. The dust is isolated on the outer layer of the bag. The purified gas is discharged from the fan through the air outlet. With the continuous operation of the dust collector, the dust isolated on the outside of the filter bag continues to increase, causing the equipment resistance to continue to increase. Therefore, it must be cleaned to allow the dust stuck to the outside of the filter bag to fall. Generally, automatic pulse cleaning In this way, the dust finally falls from the ash bucket to the dust storage point, and is finally processed manually. Related recommendations: Dust removal equipment characteristics and classification
相关介绍，更多脉冲除尘器型号、工作原理、造型要领、需要宇晨提供看现场出设计方案等相关服务，欢迎致电400-622-6298，我司为您提供更多更全面的信息，欢迎您的来电 The above is the introduction of the characteristics of some of the pulse precipitators of Yuchen dust removal equipment manufacturers . More types of pulse precipitators, working principles, modeling essentials, and other related services that require Yuchen to provide on-site design solutions, please call 400-622-6298 , Our company provides you with more comprehensive information, welcome your call