|Industrial dust treatment equipment series|
|Welding fume exhaust gas treatment series|
|Grinding polishing dust removal equipment|
|Stand-alone dust collector|
|Spiral duct and accessories series|
Characteristics of pulse dust collector;
Characteristics of pulse dust collector 1. The wind impulse dust removal technology with different chambers is used to prevent wind, which overcomes the shortcomings of traditional pulse dust collectors and cavity back blow dust collectors. It has strong dust removal ability, high dust removal efficiency, low emission concentration, low air leakage rate, and low energy consumption Small amount of steel, small footprint, stable and reliable operation, and good economic benefits. Suitable for metallurgy, building materials, cement, machinery, chemical, power, light industry and other industries for dust-containing gas purification and material recovery.
Characteristics of pulse dust collector 2. As the ash cleaning is performed by using pulse spraying while the chamber is closed and the wind is stopped, one blow can achieve the purpose of complete ash cleaning. This extends the ash cleaning cycle and reduces the energy consumption of ash cleaning. Greatly reduces the consumption of compressed air. At the same time, the fatigue of filter bags and pulse valves is correspondingly reduced, thereby doubling the service life of filter bags and valve plates.
Characteristics of pulse dust collector 3. Maintenance and bag changing can be performed without stopping the system fan. Under normal operating conditions, the system can be divided into multiple chambers. The filter bag mouth uses an elastic expansion ring, which has good sealing performance and is strong and reliable. The filter bag keel is polygonal, reducing the friction between the filter bag and the keel, extending the service life of the filter bag and facilitating the removal of the filter bag.
4. 采用上拉袋法. 换袋时将骨架抽出后，将脏袋放入箱体下部灰斗中，从人孔中取出，改善换袋操作条件. Features of Pulse Dust Collector 4. Using the pull-up bag method. After removing the skeleton when changing bags, put the dirty bag into the ash bucket at the lower part of the box and remove it from the manhole to improve the bag changing operation conditions.
Characteristics of pulse dust collector 5. The box is designed to be airtight and airtight. The detection line door is made of high quality sealing material. During the manufacturing process, kerosene is used for leak detection, and the leak rate is very low.
Characteristics of pulse dust collector 6. The inlet and outlet air ducts are compactly arranged and the airflow resistance is small.
The working principle of the characteristics of the pulse dust collector:
The dust-laden gas enters the cabinet from the open air inlet at the bottom. The relatively large particles of dust fall directly into the ash hopper. The dust-laden air is isolated by the filter bag, and the dust is isolated and stayed outside the cloth bag. The clean gas Pass the bag opening to the clean room, and finally discharge from the fan. The dust outside the filter bag is continuously thickened, and the pulse device starts to work. The pulse valve is opened one by one, and compressed air is blown through the nozzle to clean the filter bag, so that the filter bag expands. The outside dust falls out of the filter bag and falls into the ash hopper. The dust is finally discharged by the ash discharge valve.
的 脉冲除尘器 的产品主要是箱体、滤袋、灰斗、气管、电磁 、检修平台、脉冲清灰系统 和控制仪等 几大 部分组成。 The products of the pulse precipitator of Yuchen Dust Removal Equipment Manufacturer are mainly composed of boxes, filter bags, ash buckets, gas pipes, electromagnetics , maintenance platforms, pulse ash cleaning systems and controllers . 都 是采用严格的焊接工艺进行的，检修门 都采 用塑料 紧压密封 ， 所以 可以保证整机严密不漏风 、不会出现 漏 灰的情况出现！ Most of the boxes, ash hoppers, air pipes, etc. are carried out by strict welding processes, and the maintenance doors are sealed tightly by plastic , so it can ensure that the whole machine is tight and does not leak air , and no ash leakage occurs! 脉冲除尘器的特点 、车间除尘方案、报价，欢迎致电400-622-6298，我司为您提供更多的信息！ For more features of pulse dust collector , workshop dust removal plan, and quotation, please call 400-622-6298, our company will provide you with more information!